699526
20
Zoom out
Zoom in
Previous page
1/27
Next page
18 PERFECTA SATEL
6.10.1 Programming the address by means of the service function
The address programming function can be started from either a wired or wireless
keypad, but it will only allow setting addresses in the wired keypads.
1. Start the service mode (see: “Starting the service mode” p. 16).
2. Press successively to run the 20.K
PD
.
ADDRESS
function.
3. Information on the current address and permissible address range will be displayed on all
wired keypads (see Fig. 14).
Fig. 14. Programming keypad address (n = current address).
4. On the keypad the address of which you want to change, press the key whose digit
corresponds to the new address.
5. Press
to finish the function (the function will be finished automatically after 2 minutes
since it was launched). The keypad will be restarted.
6.10.2 Programming the address without entering the service mode
This way of address programming is useful when the keypad operation is blocked and
starting the service mode is impossible.
1. Power off the keypad.
2. Disconnect wires from the keypad CLK and DTA terminals.
3. Short the CLK and DTA keypad terminals.
4. Power on the keypad.
5. Information on the current address and permissible address range will be displayed on
the keypad (see Fig. 14).
6.
Press the key whose digit corresponds to the new address (if you make a mistake, press
to restart the keypad – current address information will be displayed again).
7. Power off the keypad.
8. Open the CLK and DTA keypad terminals.
9. Connect wires properly to the CLK and DTA keypad terminals.
10. Power on the keypad.
6.11 Identification of devices connected to the bus
Devices connected to the communication bus will not be properly supported, unless they
have been identified by the control panel. Identification of the devices is required after the
first start-up of the control panel and then each time after a new device is added or the
address was changed in a device supported by the control panel.
Disconnecting an identified device from the communication bus will trigger the tamper
alarm.
6.11.1 Starting the identification function from keypad
1. Start the service mode (see: “Starting the service mode” p. 16).
2. Press successively
to run the 21.I
DENTIFICAT
. function.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 32-WRL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 32-WRL in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 32-WRL

Satel PERFECTA 32-WRL Quick start guide - English - 10 pages

Satel PERFECTA 32-WRL User Manual - English - 31 pages

Satel PERFECTA 32-WRL Additional guide - English - 49 pages

Satel PERFECTA 32-WRL Additional guide - English - 50 pages

Satel PERFECTA 32-WRL Quick start guide - German - 11 pages

Satel PERFECTA 32-WRL User Manual - German - 32 pages

Satel PERFECTA 32-WRL Additional guide - German - 52 pages

Satel PERFECTA 32-WRL Additional guide - German - 50 pages

Satel PERFECTA 32-WRL Installation Guide - German - 28 pages

Satel PERFECTA 32-WRL Quick start guide - Dutch - 11 pages

Satel PERFECTA 32-WRL User Manual - Dutch - 32 pages

Satel PERFECTA 32-WRL Additional guide - Dutch - 52 pages

Satel PERFECTA 32-WRL Additional guide - Dutch - 50 pages

Satel PERFECTA 32-WRL Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info