699548

Satel MICRA Manual

14
Zoom out
Zoom in
Previous page
1/52
Next page
12 MICRA SATEL
You can also program some module functions by means of SMS messages.
4.1 LOCAL PROGRAMMING THROUGH RS-232 (TTL) PORT
Connect the module RS-232 (TTL) port with the USB port on a computer. To make the
connection, use the USB-RS converter offered by SATEL. Indicate in the GPRS-S
OFT
program the computer COM port to be used for communication with the module. To do so,
click on the “Configuration” button (see: Fig. 8 and explanations for the figure) and, in the
window that will open, select the proper COM port. After activation of the selected COM port,
the program will establish communication with the module.
4.2 REMOTE PROGRAMMING USING GPRS TECHNOLOGY
During the remote programming of the module, all functions that require the use
of GSM telephone will be disabled.
Remote programming is possible when the “Remote programming” option is enabled in the
module and the following items have been programmed:
– PIN code (if the card requires entering PIN code);
– Access Point Name (APN) for Internet GPRS connection;
– user name for Internet GPRS connection;
– password for Internet GPRS connection;
– DNS server IP address which is to be used by the module (the DNS server address
requires no programming, if the computer address is entered in the form of IP address,
not a name);
– initialization code for computer connection.
APN, user name, password and DNS server address can be obtained from the GSM
network operator.
The computer on which the GPRS-S
OFT
program will be running must have its address
visible in the Internet (so-called public address). Otherwise, the network server port must be
redirected to that computer, so as to make connection with the computer possible.
In order to establish communication between the module and the computer, do the following:
1. Start the GPRS-S
OFT
program.
2. Click on the "Configuration" button (see: Fig.8 and explanations for the figure) and, in the
wind
ow that will open, enter the number of TCP port selected for communication with the
module. The number will have to be included in the body of SMS message which will be
sent to the module GSM telephone number to initialize communication.
3. Click on the button (see Fig. 8). In the menu that will open, select “TCP/IP” to activate
the server.
4. Send SMS message to the module GSM telephone number. The SMS message should
have the following form: xxxx=aaaa:p= (“xxxx” is the module defined code to initialize
communication with GPRS-S
OFT
program –
“Initiating
SMS”; “aaaa” is the address of the
computer with which the module is to establish communication, shown in the IP address
form or as a name; “p” stands for the number of network port through which
communication with the GPRS-S
OFT
program is to be effected). The module will connect
to the computer whose address was given in the SMS message.
… 14 …


Need help? Post your question in this forum.

Forumrules
1

Forum

satel-micra

Reset search

  • I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel MICRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info