Manual Satel MICRA (page 13 of 52) (English)

699548

Zoom out

Zoom in

1/52

SATEL MICRA 11

– MFD-300 water flood detector,

– MGD-300 glass-break detector.

2. wireless keypad MKP-300.

The wireless devices should be registered using the GPRS-S

OFT

program.

3.8.1 ADDING NEW WIRELESS DEVICES

Wireless detectors

You can add the wireless devices in the “Options, zones, outputs” tab, “Wireless zones”

table:

1. Click your mouse pointer on one of the fields at the detector you want to add.

2. Click on the “New detector” button. The “New detector Zn” window will open, where

n means the zone number (Z6 – Z13).

3. According to the command displayed in the window, close and open the tamper contact of

the detector.

4. A message will be displayed in the window to confirm that the detector type and serial

number have been read. Click “OK”. The window will close, and the data read will be

displayed in the corresponding fields.

Make sure that the serial number read by the module corresponds to the number of

detector to be added.

5. Enter the detector name in the “Name” field.

6. Save the data to the module.

Wireless keypad

You can add the MKP-300 wireless keypad in the “MKP-300 keypad” tab:

1. Click on the “Register” button.

2. The “MKP-300 keypad” window will open, where the command to open the keypad tamper

contact will be displayed. When this action is completed, click “OK”.

3. After receiving the transmission by the module, the keypad will be registered in the

system.

4. Save the data to the module.

3.8.2 REMOVING WIRELESS DEVICES

Wireless detectors

1. Select in the “Options, zones, outputs” tab, “Wireless zones” table, any field corresponding

to the required detector, and then click on the “Remove detector” button.

2. Save the changes made to the module.

Wireless keypad

1. Select the keypad serial number in the “MKP-300 keypad” tab, “Serial number” field, and

then delete it.

2. Save the changes made to the module.

4. P

ROGRAMMING AND CONFIGURING THE MODULE

For programming and configuring the module, the GPRS-S

OFT

program version 1.06.000 is

required. The program is delivered free of charge with the device. Communication between

the program and the module can be effected locally or remotely. The module with factory

default settings can only be programmed locally.

I want to write a name for the Urmet 1784 model, is there a link? Submitted on 30-5-2022 at 16:09
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Satel MICRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel MICRA

Satel MICRA User Manual - German - 52 pages

Satel MICRA User Manual - Dutch - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Satel MICRA Manual

Product: