699075
96
Zoom out
Zoom in
Previous page
1/114
Next page
94 Programming SATEL
4. analog telephone line [INTEGRA 128, INTEGRA 64, INTEGRA 32 or INTEGRA 24 control
panel] / GSM voice channel [INTEGRA 128-WRL control panel] (basic and backup
telephone number).
If the event code is successfully sent via one transmission path, the other transmission paths
will not be used.
If sending the event code via one transmission path fails, the control panel will try to send the
event code by using the next transmission path. In the case of reporting via the telephone
line, if the event cannot be sent despite completion of the preprogrammed number of retries,
the control panel will hang up until a next event occurs, or for a specified period of time. After
the time expires, the control panel will make further attempts to send the event.
The reporting parameters can be programmed:
using the keypad, in the service mode, by means of the functions available in the
MONITORING submenu,
using the DLOADX program, in the “Reporting” window.
For correct operation, the reporting function may require enabling some system options.
Reporting through the ETHM-1 Plus / ETHM-1 / INT-GSM / GSM modules requires that some
telephone options be enabled and settings of these modules properly configured.
Before you proceed to the programming, obtain from the monitoring station operator all data
necessary to correctly start the reporting function:
depending on the method of sending events:
telephone number of the monitoring station (telephone reporting),
server address, port number, STATION KEY and KEY (ETHM) (reporting through Ethernet
network),
server address, port number, STATION KEY and KEY (GPRS) (GPRS reporting),
telephone number of the monitoring station and SMS message format (SMS reporting),
transmission format required by the monitoring station,
identifiers assigned to the alarm system,
list of event codes (not applicable to Contact ID and SIA formats).
12.1 Reporting parameters and options
See also section “Telephone options” p. 69.
Shown in square brackets are the names used in keypads.
12.1.1 Options
Station 1 or Station 2 the control panel will make an attempt to send the event code to
station 1 and, if unsuccessful, to station 2.
Station 1 onlythe event codes are only sent to station 1.
Station 2 only the event codes are only sent to station 2.
Station 1 and 2 the event codes are sent to both stations. For most formats, it is possible
then to define which events will be sent to the given station (see: EVENTS ASSIGNMENT).
Dual path reporting the option is available when the ETHM-1 Plus module with the
INT-GSM module attached to it is connected to the control panel. The control panel will
make an attempt to send the event code to station 1 and, if unsuccessful, to station 2.
The dual path reporting requires that the following settings be additionally
programmed:
just one transmission path for Station 1: ETHM (Ethernet) [settings of the ETHM-1
Plus module with the INT-GSM module connected to it],
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 User Manual - English - 51 pages

Satel Integra 64 Installation Guide - English - 36 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info