699075
86
Zoom out
Zoom in
Previous page
1/114
Next page
84 Programming SATEL
Event after 3 readings [Ev.3 unk.cards] if this option is enabled, reading in an unknown
card three times will save the event.
Alarm after 3 readings [Al.3 unk.cards] if this option is enabled, reading in an unknown
card three times will trigger an alarm. The option is available, if the EVENT AFTER 3
READINGS
option is enabled.
Code+card
Code OR cardthe user can use code or card for authentication.
Code AND cardthe user must use code and card for authentication.
Follow output the authentication method depends on the status of selected output (the
output active code and card; the output inactive code or card).
In case of the authentication using code and card, the executed function depends on
the second identifier.
9. ABAX system INTEGRA 128-WRL control panel mainboard
The parameters and options of the ABAX system and wireless devices supported by
INTEGRA 128-WRL control panel mainboard can be programmed:
using the keypad, in the service mode, by means of the functions available in the ABAX -
INTEGRA submenu (STRUCTURE HARDWARE EXPANDERS SETTINGS ABAX -
INTEGRA),
using the DLOADX program, in the Structurewindow, Hardwaretab, after clicking on
the Wireless System”.
The procedures of adding / deleting the ABAX 2 / ABAX wireless devices are described in the
INTEGRA 128-WRL installer manual.
The procedures of adding / deleting and configuring the ABAX 2 / ABAX keyfobs are
described in the user manual. You can define the list of outputs whose status is to be
presented by the ABAX 2 / ABAX keyfob LEDs:
using the keypad, in the service mode, by means of the ABAX CONFIRMAT. function
(STRUCTURE HARDWARE EXPANDERS ABAX CONFIRMAT.),
using the DLOADX program, in the Keyfobs ABAXwindow (the command for opening
this window is available in the Usersmenu).
When connecting the ABAX 2 / ABAX controller to the INTEGRA 128-WRL control
panel, you should synchronize the data related to APT-200 / APT-100 keyfobs. In the
keypad, in the service mode, the COPY ABAX KFOBS function is available (STRUCTURE
HARDWARE EXPANDERS COPY ABAX KFOBS), which enables copying the keyfob
related data. In the DLOADX program, to write to a new controller the data about
APT-200 / APT-100 keyfobs already assigned to the users, click on the Write to all
button in the Keyfobs ABAX window.
9.1 Parameters and options of ABAX system
Assigned to partition partition in which an alarm will be triggered if the ABAX system is
jammed.
Response period communication with wireless devices takes place in specified intervals.
The control panel is then gathering information on the status of wireless devices and, if
necessary, sending commands to the devices, e.g. switching the detectors to their
active/passive state, switching on/off the test mode and/or changing configuration of the
devices. The response period can be 12, 24 or 36 seconds. The less often communication
between the control panel and the wireless devices takes place, the more wireless devices
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 User Manual - English - 51 pages

Satel Integra 64 Installation Guide - English - 36 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info