699031
59
Zoom out
Zoom in
Previous page
1/102
Next page
SATEL INTEGRA Plus 57
Reporting delay option for the 4-8 and 64-79 zone types. Violation of the zone during the
entry delay countdown will trigger a warning alarm. The warning alarm does not cause any
loud alarm signal and is not reported. It can be signaled by the outputs of 9. DAY ALARM,
12. SILENT ALARM and 116. INTERNAL SIREN type. If the zone is not disarmed within 30
seconds, the entry delay has expired or another instant is violated, the burglary alarm will
be triggered.
Blocks verification option for 0-2, 85-86 and 94-95 zone types. If it is enabled, violation of
the zone will block verification of alarms in the partition. All alarms will be unverified until
the partition is armed again.
Check arm possibility option for the arming zones (80 and 82 zone types). The zone will
not arm, if a zone with enabled PRIORITY option is violated in the partition, or other
circumstance have occurred which prevent arming (depending on the selected options,
tamper, trouble, etc.).
Restore disarms option for the 89. FINISHING EXIT DELAY zone type. If it is enabled, the
zone restore will disarm the partition. This option overrides the option RESTORE DISABLES
VERIF
.
Restore disables verif. option for the 89. FINISHING EXIT DELAY zone type. If it is enabled,
the zone restore will disable verification of alarms in the partition. All alarms will be
unverified until the partition is armed again.
Disabled in arm state option for the 91. DETECTOR MASK zone type. If the option is enabled
and the zone is violated when armed, the information on detector trouble (masking) will not
be stored into the event log (the event code will not be sent to the monitoring station).
4.3.7 Counters
The control panel makes it possible to program 16 different counters which determine the
operating mode of the counter zones (zone types 16-31). The counter parameters can be
programmed:
using the keypad, in the service mode, by means of the COUNTERS function (ZONES
COUNTERS).
using the DLOADX program, in theZoneswindow, Counters tab.
The following should be programmed for each counter:
Max. value number of violations which, if exceeded, will trigger an alarm.
Counting time the time in which violations are counted.
Counter type:
normalall violations of counter group zones are counted,
omit recurs skips violations of the same zone (the alarm will be triggered, if the number
of violations of different zones exceeds the maximum value).
If the counter skips repeats, the programmed MAXIMUM COUNTER VALUE must be lower
than the number of zones in counter group.
4.3.8 Bypasses
You can define a group of zones for each of the zone types from 64 to 79:
using the keypad, in the service mode, by means of the BYPASSES function (ZONES
BYPASSES).
using the DLOADX program, in theZoneswindow, Bypassestab.
Having assigned the zones to a group, define what reaction should be to violation of the
bypassing zone:
Bypass only the zones belonging to the group will be bypassed for BYPASS TIME (see:
p. 50).
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 256 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 256 Plus in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 256 Plus

Satel Integra 256 Plus User Manual - English - 51 pages

Satel Integra 256 Plus Installation Guide - English - 35 pages

Satel Integra 256 Plus User Manual - German - 55 pages

Satel Integra 256 Plus Additional guide - German - 108 pages

Satel Integra 256 Plus Installation Guide - German - 36 pages

Satel Integra 256 Plus Quick start guide - Dutch - 2 pages

Satel Integra 256 Plus Additional guide - Dutch - 108 pages

Satel Integra 256 Plus User Manual - Dutch - 53 pages

Satel Integra 256 Plus Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info