699073
76
Zoom out
Zoom in
Previous page
1/114
Next page
74 Programming SATEL
it is not possible to view the status of zones, partitions, alarms, trouble memory and
current troubles by pressing and holding down the dedicated keypad keys (the
corresponding options are disabled and cannot be enabled),
it is not possible to present information on partition status in the bottom line of keypad
display (relevant parameters in the keypad settings will be automatically modified),
after entering the user menu by means of the service code, you will get access in the
EVENTS submenu to the GRADE 2 function, which enables viewing the events required by
EN 50131 for Grade 2,
the SYSTEM STATE user function provides information about alarms, bypassed zones,
troubles and partition status (disarmed or type of armed mode).
Tamper if no communication with ABAX device (2h) [L.no ABAX=tamp] with this option
enabled, tamper alarm will be triggered if there is no communication with a wireless device
of the ABAX 2 / ABAX system for 2 hours.
No shortcuts in menu if this option is enabled, the user menu shortcuts are not supported.
Do not report SATEL server connection trouble [No SATEL trbl.] if this option is
enabled, loss of communication with the SATEL server will not be reported as trouble.
Do not report LAN loss on AC loss [No LAN(AC) tr.] if this option is enabled, trouble will
not be reported after Ethernet network loss in the event of control panel AC power failure.
6.4 Arming options
Display violated/bypassed zones on arming [Arm, view viol] if this option is enabled, the
user will be informed of the violated / bypassed zones when arming the system from
keypad.
If the system is being armed in the full + bypasses mode, bypasses and violations of
the zones for which the BYPASSED IF NO EXIT option is enabled are not checked.
If the system is being armed in the without interioror without interior and without
entry delay” mode, bypasses and violations of the 3. INTERIOR DELAYED type zones are
not checked (unless the DELAY IN 2&3 TYPE ARMING option is enabled for the zone).
Warn while arming if trouble [Arm, warn.trb.] if this option is enabled, the user will be
informed of the existing troubles, if any, when arming the system from keypad.
Do not arm if tampered [If tamper] if this option is enabled, arming will be impossible if
a tamper is discovered.
Do not arm if reporting trouble [If monit.trbl.] if this option is enabled, arming will be
impossible in case of any problems with reporting.
Do not arm if battery trouble [If batt. trbl.] if this option is enabled, arming will be
impossible in case of a battery failure.
Do not arm if outputs trouble [If outs. trbl.] if this option is enabled, arming will be
impossible when the control panel detects that the mainboard outputs are overloaded or
devices connected to these outputs are cut off.
Do not arm if trouble [If other trbl.] if this option is enabled, arming will be impossible in
case of a trouble.
Required system reset after verified alarm [If verif. al.] if this option is enabled, arming
will be impossible after a verified alarm.
The options DO NOT ARM IF TAMPERED, DO NOT ARM IF BATTERY TROUBLE, DO NOT ARM IF
TROUBLE, DO NOT ARM IF OUTPUTS TROUBLE and DO NOT ARM IF REPORTING TROUBLE are
available, when the WARN WHILE ARMING IF TROUBLE option is enabled.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 128 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 128

Satel Integra 128 User Manual - English - 51 pages

Satel Integra 128 Installation Guide - English - 36 pages

Satel Integra 128 User Manual - German - 54 pages

Satel Integra 128 Additional guide - German - 121 pages

Satel Integra 128 Installation Guide - German - 38 pages

Satel Integra 128 Quick start guide - Dutch - 24 pages

Satel Integra 128 User Manual - Dutch - 52 pages

Satel Integra 128 Additional guide - Dutch - 121 pages

Satel Integra 128 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info