699062
28
Zoom out
Zoom in
Previous page
1/37
Next page
26 Installer Manual SATEL
Most of the ABAX 2 wireless devices are identified in the alarm system by the names
known from the ABAX system.
For some wireless devices, you can select whether the device will take up one or two
positions (channels) on the list of devices. If you select one position for the ABAX
device:
AMD-101 only additional NC input will be supported,
AMD-102 only additional inputs (roller shutter and NC) will be supported,
AOD-200 only the motion detector will be supported,
ATD-100 you will be able to program only one temperature threshold,
AVD-100 only the vibration detector will be supported.
LCD Keypad
You can add wireless devices in service mode, using the NEW DEVICE function (STRUCTURE
HARDWARE EXPANDERS SETTINGS ABAX - INTEGRA NEW DEVICE).
When adding a device you can select the alarm system zone to which you want to assign the
device. If the device takes up more than one position on the list of devices, additional zones
will be assigned to the device automatically (these will be the zones following the selected
one). To the outputs, the device is assigned automatically.
1. Start the NEW DEVICE function.
2. When the “Device serial number:” is displayed, enter the serial number of the device
being added.
3. Press .
4. When the “Open device tamper” command is displayed, power on the device (insert the
battery into the device, turn on the device power, etc.).
5. Type and serial number of the device will be displayed (if a message is displayed instead
to inform you that the entered serial number is invalid or the device is already registered,
press to quit the function).
6. Press the key 1.
7. If you can select whether the device will take up one or two positions (channels) on the list
of devices, a special message will inform you about it. Press the key 1 (the device will
occupy 1 position) or the key 2 (the device will occupy 2 positions).
8. Use the and keys to select the zone to which you want to assign the device.
9. Press .
10. A message will be displayed to inform you that expander identification procedure has
been started.
11. When the procedure is finished, the new name of the zone / output to which the device
has been assigned will be displayed. You can change that name.
12. Press .
13. If the device occupies two or more zones / outputs, the name giving procedure is
repeated for them.
DLOADX program
You can add wireless devices in the Structurewindow, Hardwaretab, after clicking on the
Wireless System”.
The device being added is assigned to zones and outputs automatically
1. Click on the “New device” button.
2. The “New device” window will open.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel integra 128-WRL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel integra 128-WRL in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel integra 128-WRL

Satel integra 128-WRL User Manual - English - 51 pages

Satel integra 128-WRL Additional guide - English - 114 pages

Satel integra 128-WRL Installation Guide - German - 2 pages

Satel integra 128-WRL Additional guide - German - 121 pages

Satel integra 128-WRL User Manual - German - 38 pages

Satel integra 128-WRL Additional guide - Dutch - 121 pages

Satel integra 128-WRL User Manual - Dutch - 52 pages

Satel integra 128-WRL Quick start guide - Dutch - 24 pages

Satel integra 128-WRL Installation Guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info