699391
17
Zoom out
Zoom in
Previous page
1/40
Next page
SATEL INT-TSI 15
9.1.4 EOL resistance value [MASTER only]
The resistance data are stored in the keypad. Before you proceed to programming the
resistor values, read out the data from the keypad (Read button), and, after the
programming is completed, write them to the keypad (Writebutton). These data are
not read and written after you click the button in the program main menu.
The value of EOL resistors is programmable. Depending on the control panel to which the
keypad is connected:
INTEGRA: parameters of the EOL resistors should be defined for zones in a single keypad.
Value of the resistors R1 and R2 is to be programmed (numbering of the resistors is
shown in Fig. 11). You can enter values from 500 to 15 k. The total resistance
(R1+R2) may not exceed 15 k. For the R2 resistor, you can program value 0. In such a
case, the value of resistors used in the Double EOL configuration must be equal to half the
value programmed for the R1 resistor (the value of one resistor must not be less than
500 ). By default, the following values are programmed:
R1 = 1.1 k;
R2 = 1.1 k.
The resistor value for Single EOL configuration is the sum of R1 and R2 resistors.
Fig. 10. EOL resistance valuetab in DLOADX program.
INTEGRA Plus: parameters of the EOL resistors should be defined for the mainboard zones.
The same parameters will be set automatically for the zones in keypads in which the value
of EOL resistors is programmable. Therefore, the EOL resistance value tab is not
available.
Fig. 11. Numbering of EOL resistors (same for the NO detector).
T tamper. A alarm. M – masking.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-WSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-WSW in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-WSW

Satel INT-TSI-WSW User Manual - English - 20 pages

Satel INT-TSI-WSW User Manual - English - 24 pages

Satel INT-TSI-WSW Installation Guide - German - 34 pages

Satel INT-TSI-WSW User Manual - Dutch - 20 pages

Satel INT-TSI-WSW Installation Guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info