699391
12
Zoom out
Zoom in
Previous page
1/40
Next page
10 INT-TSI SATEL
9. Keypad configuration
9.1 Parameters and options
Parameters and options of the INT-TSI keypad can be programmed by means of:
LCD keypad (terminal SERVICE MODE STRUCTURE HARDWARE LCD KEYPADS
SETTINGS [keypad name]);
DLOADX program (Structurewindow Hardware tab Keypads item [keypad
name]). The keypad working in SLAVE mode is presented in the tree structure as a slave
in relation to the keypad working in MASTER mode (click on “+” next to the name of
keypad working in MASTER mode to see the branch with the name of keypad working in
SLAVE mode).
The procedure of entering the service mode by means of the INT-TSI keypad is described in
section Programming keypad address by means of service function” (p. 7).
Some parameters and options are only available for the keypad working in MASTER mode.
Shown in square brackets are the names used in keypads.
9.1.1 Keypad
Nameindividual name of the keypad (up to 16 characters).
In the case of the keypad working in SLAVE mode, the name can only be edited in the
TSI BUILDER program (see section Changing the name of keypad working in SLAVE
modep. 36).
Partitions managed by keypad [Partitions] the partitions which can be armed/disarmed or
alarm in which may be cleared from the keypad. These functions are available to the users
having a suitable authority level and access to those partitions.
Using the service code you can operate all partitions, irrespective of which partitions
are operated by the keypad.
Show alarms of partitions [Alarms] the keypad can signal burglary alarms from selected
partitions.
Show fire alarms of partitions [Fire alarms] the keypad can signal fire alarms from
selected partitions.
CHIME signal of zones [Chime zones] the keypad can audibly signal violation of selected
zones. If the zone is armed, violation will not trigger the CHIME signal.
Zone disabling CHIME [Chime bps. zone] zone, which, if violated, will disable the CHIME
feature for specified time.
Bypass time [Chime bps. time] time during which the CHIME signal will be disabled after
violation of the zone which disables the signaling (time is counted from the zone restore). If
the value 0 is programmed, the signaling will not be disabled.
Quick Arm partitions [Quickarm part.] partitions which will be armed in case of the quick
arming, i.e. without user authorization.
Show entry delay of partitions [Entry time p.] information on entry delay countdown in
selected partitions can be displayed on the keypad.
Show exit delay of partitions [Exit time part.] information on exit delay countdown in
selected partitions can be displayed on the keypad.
Alarm messages
Partitions [Part.alarm msg.] if this option is enabled, messages on partition alarms will be
displayed (they contain the name of partition).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-WSW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-WSW in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-WSW

Satel INT-TSI-WSW User Manual - English - 20 pages

Satel INT-TSI-WSW User Manual - English - 24 pages

Satel INT-TSI-WSW Installation Guide - German - 34 pages

Satel INT-TSI-WSW User Manual - Dutch - 20 pages

Satel INT-TSI-WSW Installation Guide - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info