699331
9
Zoom out
Zoom in
Previous page
1/40
Next page
SATEL INT-TSI 7
Fig. 5. Securing the Ethernet cable.
6.2 Addressing
The keypad must have an individual address set in it:
from the 0 to 3 range, if it is connected to the INTEGRA 24 or INTEGRA 32 control panel;
from the 0 to 7 range, if it is connected to another INTEGRA or INTEGRA Plus control
panel.
By default, address 0 is set in the keypad.
When started, only the control panel with factory default settings can provide support
for all keypads connected to the bus, irrespective of the addresses set in them. In all
other cases, the control panel will block operation of the keypads having identical
addresses.
The address set in the keypad determines the numbers to be given to the keypad zones (see
the INSTALLER MANUAL for INTEGRA or INTEGRA Plus control panels).
6.2.1 Programming keypad address by means of service function
1. Find the tab in which the terminal is available (in the keypad with factory settings, tap the
icon on the tab bar).
2. Enter the service code (by default: 12345) and touch the key. The user menu will
be displayed.
3. Touch the key. The service mode will start up.
4. Start the KEYPADS ADDR. function (STRUCTURE HARDWARE IDENTIFICATION KEYPADS
ADDR
.). A window will be displayed in which you can set the address (after starting the
function, you can set the address in all keypads connected to the control panel).
5. Using the and keys, set the address and then tap the icon. The terminal
with service menu will be displayed on the screen.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSI-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSI-BSB in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSI-BSB

Satel INT-TSI-BSB Installation Guide - German - 34 pages

Satel INT-TSI-BSB User Manual - German - 20 pages

Satel INT-TSI-BSB Installation Guide - Dutch - 33 pages

Satel INT-TSI-BSB User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info