699392
24
Zoom out
Zoom in
Previous page
1/28
Next page
22 INT-TSH SATEL
is disabled, the trouble information will be hidden after just one of the partitions is armed in
any mode).
Show code entering [Code entry ind.] – if this option is enabled, entering the code is
presented on the keypad display by asterisks.
Chime on/off – if this option is enabled, the chime signal can be turned on/off after tapping
and holding for 3 seconds on terminal.
Quick control – if this option is enabled, you can control the outputs without entering the
code:
– after tapping on the main screen,
using the keys designated by numbers on terminal. When programming the control
panel, assign the 15. CONTROLLED outputs to the keys (see the control panel
programming manual).
Sign. new trouble [New trbl.signal.] – if this option is enabled, the keypad will audibly signal
occurrence of any new trouble (additionally, the TROUBLE MEMORY UNTIL REVIEW option
must be enabled in the control panel – see: control panel programming manual). The
signaling will be turned off after reviewing the trouble with the 7. SYSTEM STATE user
function.
Auto-Arm delay countdown [Autoarm signal.] – if this option is enabled, the auto-arm delay
countdown is signaled acoustically.
Arm mode review [Arm mode check.] – if this option is enabled, you can inspect the partition
state without entering the code:
– after tapping on the “System status” screen,
after tapping and holding for 3 seconds on the terminal.
Alarm messages
Partitions [Part.alarm msg.] – if this option is enabled, messages on partition alarms will be
displayed (they contain the name of partition).
Zones [Zone alarm msg.] – if this option is enabled, messages on alarms from zones will be
displayed (they contain the name of zone). The zone alarm messages have the priority.
Alarms
PANIC alarm – if this option is enabled, you can trigger panic alarm from the keypad by
tapping and holding for 3 seconds:
on the “Emergency” screen,
on the terminal.
silent [Silent panic] – if this option is enabled, the panic alarm triggered from the keypad will
be a silent one (without loud signal). Additionally, the silent panic alarm can be triggered
by tapping and holding any part of the status screen for about 3 seconds. The option is
available, if the PANIC ALARM option is enabled.
FIRE alarm – if this option is enabled, you can trigger fire alarm from the keypad by tapping
and holding for 3 seconds:
on the “Emergency” screen,
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSH-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSH-BSB in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSH-BSB

Satel INT-TSH-BSB User Manual - English - 20 pages

Satel INT-TSH-BSB Quick start guide - English - 2 pages

Satel INT-TSH-BSB User Manual - English - 19 pages

Satel INT-TSH-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 20 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 28 pages

Satel INT-TSH-BSB User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info