699392
7
Zoom out
Zoom in
Previous page
1/28
Next page
SATEL INT-TSH 5
4. Addressing
Each keypad connected to the control panel must have its individual address set on it. By
default, address 0 is set in the keypad.
When started, only the control panel with factory default settings can provide support
for all keypads connected to the bus, irrespective of the addresses set in them. In all
other cases, the control panel will block operation of the keypads having identical
addresses.
4.1 Keypad connected to INTEGRA / INTEGRA Plus control panel
The keypad must have an address set in it:
from the 0 to 3 range, if it is connected to the INTEGRA 24 or INTEGRA 32 control panel;
from 0 to 7 range, if it is connected to another INTEGRA or INTEGRA Plus control panel.
The address set in the keypad determines the numbers to be given to the keypad zones (see
the INSTALLER MANUAL for INTEGRA or INTEGRA Plus control panels).
4.1.1 Programming keypad address by means of service function
1. Tap on the main screen. The “Advanced” screen will be displayed.
2. Tap . The terminal will be displayed.
3. Enter the service code (by default: 12345) and tap . The user menu will be
displayed.
4. Tap . The service mode will start up.
5. Start the KEYPADS ADDR. function (STRUCTURE HARDWARE IDENTIFICATION KEYPADS
ADDR
.). The “This LCD address (n, 0-x)” message will appear on the displays of all
keypads connected to the control panel (n – keypad address; 0-x – range of supported
addresses).
6. Tap the key with the digit corresponding to the address which is to be programmed on the
keypad.
7. To terminate the address change function, tap . The function will be terminated
automatically after 2 minutes from being started. Termination of the function will restart
the keypad (the service mode menu will be displayed on the keypad with the lowest
address).
4.2 Keypad connected to VERSA / VERSA Plus / VERSA IP control panel
An address from within the 0 do 5 range must be set on the keypad.
4.2.1 Programming keypad address by means of service function
1. Tap on the main screen. The “Advanced” screen will be displayed.
2. Tap . The terminal will be displayed.
3. Enter the service code (by default: 12345) and tap . The user menu will be
displayed.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSH-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSH-BSB in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSH-BSB

Satel INT-TSH-BSB User Manual - English - 20 pages

Satel INT-TSH-BSB Quick start guide - English - 2 pages

Satel INT-TSH-BSB User Manual - English - 19 pages

Satel INT-TSH-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 20 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 28 pages

Satel INT-TSH-BSB User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info