699393
12
Zoom out
Zoom in
Previous page
1/28
Next page
10 INT-TSG SATEL
Show viol. zones [Zone violation] – with this option enabled, violating the CHIME signal
triggering zone result additionally in the zone name being displayed.
Auto-Arm delay countdown [Auto-arm delay] – with this option enabled, the auto-arm delay
countdown in partition is signaled acoustically.
Show disarm messages [Show disarming] – if this option is enabled, the keypad will inform
about disarming with a displayed message at all times. If the option is disabled – only in
case of disarming from the given keypad.
Show arm messages [Show arm] – if this option is enabled, the keypad will inform about
arming with a displayed message (irrespective of how the system was armed).
Quick control [Control (8#)] – if this option is enabled, the O
UTS CONTROL
user function can
be started without entering the user code:
– after tapping the icon on the main screen, if no macro command is assigned to the
group;
after tapping and holding the
icon on the main screen for about 3 seconds, if at
least one macro command is assigned to the group;
from the terminal, after you tap in turn the
and keys.
Zones
For each of the keypad zones can be defined whether it will be used or not.
Auto-backlight
The keypad can be woken up after occurrence of a specified event in the system: starting the
entry delay countdown in a selected partition, or violating a selected zone.
Wake-up
You can define how the keypad will respond to the wake-up (after a tap on the screen by the
user or occurrence of a specified event in the system):
Status screen – status screen will be displayed.
Menu screen – main screen will be displayed.
Disarming – if at least one partition managed by the keypad is armed, the authorization
screen will be displayed (after entering the code and tapping , and depending on the
system state: the partition(s) will be disarmed / partition selection screen will be displayed /
“Alarm clearing / Disarming” screen will be displayed). If none of the partitions is armed,
the main screen will be displayed.
Photo frame – if this option is enabled, the following will be displayed after 10 minutes of
keypad inactivity:
slide show – if there are at least two pictures on the memory card and the value of
C
HANGE PICTURE EVERY
parameter is different from 0,
clock – if there are one or no pictures on the memory card or the value of C
HANGE PICTURE
EVERY
parameter is 0.
If this option is disabled, the screen will go blank after 10 minutes of keypad inactivity.
Tamper signaled in part. [Tamper in part.] – partition where alarm will be triggered in the
event of keypad tamper (opening the enclosure or disconnecting keypad from the bus).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB User Manual - English - 20 pages

Satel INT-TSG-BSB User Manual - English - 18 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info