699393
9
Zoom out
Zoom in
Previous page
1/28
Next page
SATEL INT-TSG 7
1. Open the keypad enclosure (see: Fig. 1).
2. Insert the card into its slot (see Fig. 3) and push until it clicks into place. The card contacts
should be directed toward the display.
3. Close the keypad enclosure.
6.2 Removing the microSD card
1. Open the keypad enclosure (see: Fig. 1).
2. Push the card to release it.
3. Remove the card from its slot.
7. Keypad configuring
7.1 Keypad connected to INTEGRA / INTEGRA Plus control panel
To configure the keypad settings you can use:
D
LOAD
X program: “Structure” window Hardware” tab “Keypads” branch [keypad
name]. The D
LOAD
X program alone makes it possible to configure all the settings.
LCD keypad: S
ERVICE MODE
S
TRUCTURE
H
ARDWARE
LCD
KEYPADS
S
ETTINGS
[keypad name]. How to enter the service mode, refer to the section on programming
keypad address by means of the service function (p. 4).
7.1.1 Keypad
Shown in square brackets are the names displayed on keypads.
Name – individual name of the keypad (up to 16 characters).
Partitions managed by keypad [Partitions] – the partitions which can be armed/disarmed or
alarm in which may be cleared from the keypad. These functions are available to the users
having a suitable authority level and access to those partitions.
Using the service code you can operate all partitions, irrespective of which partitions
are operated by the keypad.
Show alarms of partitions [Alarms] – the keypad can signal burglary alarms from selected
partitions.
Show fire alarms of partitions [Fire alarms] – the keypad can signal fire alarms from
selected partitions.
CHIME signal of zones [Chime zones] – the keypad can audibly signal violation of selected
zones. If the zone is armed, violation will not trigger the CHIME signal.
Zone disabling CHIME [Chime bps. zone] – zone, which, if violated, will disable the CHIME
feature for specified time.
Bypass time [Chime bps. time] – time during which the CHIME signal will be disabled after
violation of the zone which disables the signaling (time is counted from the zone restore). If
the value 0 is programmed, the signaling will not be disabled.
Quick Arm partitions [Quickarm part.] – partitions which can be armed without entering the
code (quick arming).
Show entry delay of partitions [Entry time p.] – the partitions, for which counting the entry
delay will be indicated by text appearing on the display.
Show exit delay of partitions [Exit time part.] – the partitions for which counting the exit
delay will be indicated by text appearing on the display.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB User Manual - English - 20 pages

Satel INT-TSG-BSB User Manual - English - 18 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info