699393
7
Zoom out
Zoom in
Previous page
1/28
Next page
SATEL INT-TSG 5
the keypad (the service mode menu will be displayed on the keypad with the lowest
address).
4.2 Keypad connected to VERSA / VERSA Plus control panel
An address from within the 0 do 5 range must be set on the keypad.
4.2.1 Programming keypad address by means of service function
1. Tap on the main screen. The “Advanced” screen will be displayed.
2. Tap . The terminal will be displayed.
3. Enter the service code (by default: 12345) and tap . The user menu will be
displayed.
4. Tap in turn . The service mode will start up.
5. Tap in turn . The K
EYPADS ADDR
. function will start. On all
keypads, LEDs designated by icons will start blinking and current address information will
be presented.
6. Tap the key with the digit corresponding to the address which is to be programmed on the
keypad.
7. To terminate the address change function, tap . The function will be terminated
automatically after 2 minutes from being started. Termination of the function will restart
the keypad.
4.3 Programming address without entering the service mode
This way of address programming is useful when the keypad operation is blocked and
starting the service mode is impossible. It can be used irrespective of which control panel the
keypad is connected to.
1. Turn off keypad power supply.
2. Disconnect wires from the keypad terminals CKM and DTM.
3. Short the keypad terminals CKM and DTM.
4. Turn on keypad power supply. A message indicating the current address will appear on
the display.
5. Tap the key with the digit corresponding to the address which is to be programmed on the
keypad.
6. Turn off keypad power supply.
7. Open the keypad terminals CKM and DTM.
8. Connect wires, as required, to the keypad terminals CKM and DTM.
9. Turn on keypad power supply.
5. Keypad identification
The alarm system can only be programmed and operated from keypads that have been
identified by the control panel. The keypad identification function should be executed at the
first start-up of the control panel, and then each time when adding a new keypad or changing
address in a keypad supported by the control panel. Disconnecting an identified keypad from
the bus will trigger the tamper alarm.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB User Manual - English - 20 pages

Satel INT-TSG-BSB User Manual - English - 18 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info