Manual Satel CA-6 (page 4 of 40) (English)

699578

Zoom out

Zoom in

1/40

FS63 - programming zone violation codes (HEX)...........................................................21

FS64 - programming zone RESTORE (end of violation) codes (HEX) ...........................21

FS65 - programming zone TAMPER RESTORE codes (HEX).......................................21

FS67 - programming zone event assignment to station 1 (BIT)......................................21

FS68 - programming zone event assignment to station 2 (BIT)......................................21

Monitoring - programming partition event codes ................................................................22

FS69 - programming A partition event codes (HEX).......................................................22

FS70 - programming B partition event codes (HEX).......................................................22

FS73 - programming A partition event assignment to station 1 (BIT) .............................22

FS74 - programming B partition event assignment to station 1 (BIT) .............................22

FS77 - programming A partition event assignment to station 2 (BIT) .............................23

FS78 - programming B partition event assignment to station 2 (BIT) .............................23

Monitoring - programming system event codes..................................................................23

FS81 - programming system event codes - set I (HEX)..................................................23

FS82 - programming system event codes - set II (HEX).................................................23

FS83 - programming system event assignment to station 1 (BIT) ..................................24

FS84 - programming system event assignment to station 2 (BIT) ..................................24

FS85 - programming test transmission time (DEC).........................................................25

FS86 - programming the „AC loss” report delay (DEC)...................................................25

Messaging – programming telephone number ...................................................................26

FS87 - programming telephone number 1 (HEX) ...........................................................26

FS88 - programming telephone number 2 (HEX) ...........................................................26

FS89 - programming telephone number 3 (HEX) ...........................................................26

FS90 - programming telephone number 4 (HEX) ...........................................................26

FS95 - programming assignment of partitions and messages (BIT)...............................26

Messaging – programming of PAGER messages ..............................................................26

FS96 - programming message 1 (POLPAGER format) ..................................................26

FS97 - programming message 2 (POLPAGER) .............................................................26

Messaging – programming of messaging parameters........................................................27

FS100 - programming number of rounds and redial number in a round (DEC) ..............27

FS101 - programming number of rings before answer (DEC).........................................28

Functions programming TIMERS .......................................................................................28

FS102 - programming TIMERA 1 (DEC).........................................................................28

FS103 - programming TIMERA 2 (DEC).........................................................................28

FS104 - programming TIMERA 3 (DEC).........................................................................28

FS105 - programming TIMERA 4 (DEC).........................................................................28

FS106 - programming TIMER functions (DEC)...............................................................28

Special functions ................................................................................................................29

FS107 - restoring default settings ...................................................................................29

FS108 - clearing event log..............................................................................................29

FS109 - restoring default communication passwords .....................................................29

FS110 - restoring default codes......................................................................................29

FS111 - programming keypad address (BIT)..................................................................29

FS112 - start of programming from computer in local mode...........................................30

FS117 - telephone line trouble delay (DEC) ...................................................................31

FS118 - parameters of pager station signals (HEX) .......................................................31

FS123 - counter count-up times (DEC)...........................................................................32

FS124 - automatic readout of keypad address ...............................................................32

FS125 - programming CTL input functions (HEX) ..........................................................32

FS126 - programming guard control codes (HEX)..........................................................33

FS127 - zones bypassed on no exit from A partition (BIT)..............................................33

FS128 - zones bypassed on no exit from B partition (BIT)..............................................33

FS131 - programming additional options (BIT) ...............................................................33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-6

Satel CA-6 Quick start guide - English - 8 pages

Satel CA-6 Installation Guide - English - 36 pages

Satel CA-6 Additional guide - German - 19 pages

Satel CA-6 User Manual - German - 19 pages

Satel CA-6 Installation Guide - German - 80 pages

Satel CA-6 User Manual - German - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Satel CA-6 Manual

Product: