699607
13
Zoom out
Zoom in
Previous page
1/24
Next page
CA-5 SATEL
11
Problems with access to settings memory
– may occur when the RESET pins on the control
panel main board are shorted. If the pins are open, and connecting the power off and on does not
clear the trouble signaling, intervention of the service personnel is necessary.
Wrong communication codes
– means that during three consecutive communication sessions
with the computer the control panel hanged up after reading a wrong communication code three
times – in such a case, the panel suspends communication with the computer for 30 minutes (upon
answering a call it sends to the computer a message that the connection capability is disabled and
„hangs up”).
Monitoring trouble
– this message indicates multiple occupancy of the line, when the monitoring
station fails to go "off hook", does not send the handshake, or the acknowledgement signal after
receiving the codes. If this signaling persists, the monitoring is ineffective and requires intervention
of the service personnel or the technicians from monitoring station.
Dialing error
– information on the cause of an unsuccessful telephone connection (lack of the dialing
tone after the handset is lifted, or presence of an intermittent signal instead of the continuous one).
The signaling of trouble will remain on until next successful telephone connection.
Depending on the programmed options, the current trouble memory will be deleted on
clearing the cause of trouble, or only after running the above-mentioned current trouble
checkout function.
5.4 S
WITCHING THE CHIME
O
N
/O
FF
[8]
This function (holding down the [8] key) makes it possible to switch on/off the chime signal
(signaling the violation of selected zones when the control panel is disarmed) from the
keypad. Three short beeps in the keypad confirm switching off the chime signaling function,
whereas four short beeps and a long one mean that the signaling is on.
The installer specifies which zones will generate the chime signal.
5.5 F
IRE ALARM
[
*
]
This function makes it possible to trigger the fire alarm from the keypad. The control panel
activates signaling on the OUT1 output in the keypad and sends an appropriate code to the
monitoring station. The function can be disabled by the installer.
5.6 A
UXILIARY ALARM
[0]
The meaning of this alarm is specified depending on the needs. The function may transmit
information on the auxiliary alarm to the monitoring station (it may be, for example, a call for
medical assistance, as it was adopted in the Contact ID monitoring format).
The function may be disabled by the installer.
5.7 P
ANIC ALARM
[#]
This function makes it possible to trigger the panic alarm from the keypad. The control panel
activates signaling on the OUT1 output in the keypad and sends an appropriate code to the
monitoring station. The function can be disabled by the installer or limited to the keypad and
monitoring only (the SILENT panic alarm).
6. U
SER FUNCTIONS ACCESSIBLE WITH ACCESS CODE
If the control panel is not armed and is signaling no alarm, the users can access several
functions useful in everyday operation of the security system.
The user functions described in this section are activated by entering the user access code
and confirming it with the [
*
] key (not the [#] key as is the case when arming the system).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Installation Guide - English - 27 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info