699607
10
Zoom out
Zoom in
Previous page
1/27
Next page
Installer Manual CA-5
8
1. The computer calls the alarm control panel, which, having answered the call,
exchanges communication passwords with the computer. If they are correct,
the control panel confirms reception of the remote programming order, hangs up and
calls the computer back to the number pre-programmed in the control panel. Before
calling back, the control panel notifies the monitoring station on starting the
programming process.
2. The computer calls the control panel and, after handshaking, the control panel
proceeds directly to data exchange. This simplified mode of establishing connection
can be reached, when no computer telephone number is entered on the control panel.
The monitoring station will be notified after communication with the computer is ended.
3. Establishing communication on the control panel side by means of the 0 function
called by the master user or the service. Having called the function, the control panel
dials the computer telephone number pre-programmed with the FS 4 service function
and, after completion of the programming, notifies the monitoring station.
Initialization of the connection by the computer can be disabled.
In order to reduce the telephone connection costs, the transmission can be repeatedly
suspended. In case of a new connection, the control panel does not inform the monitoring
station of the remote programming, as this is only done before the first call-back. Instead,
after receiving the communication termination command, information on completion of the
remote programming is sent to the station. After suspending communication on the
computer side, the control panel is waiting four hours for a call, even when the automatic
call answering function is disabled. If the communication is not terminated with the “end”
but with the “suspend” command, the information on terminating the communication is
registered in the event memory and, after four hours, sent to the monitoring station.
Communication with the computer requires:
The following to be programmed in the control panel:
FS 2: control panel password (the identifier which allows the program to
recognize the security system).
FS 3: computer password (the identifier which allows the control panel to
recognize computer authorized for communication).
FS 4: computer telephone number (it is not necessary but provides higher
protection against unauthorized access by the telephone line).
FS 5: number of rings before answer (where the communication is to be
initialized from the computer).
FS 11 option 1: if the DWNL function is to be initialized from the outside (by the service
computer).
Cable connection (telephone or local) of the control panel with the computer modem.
Launching the DLOAD10 program and initializing the modem operation.
Setting identical communication passwords, options and number of rings in the security
system with those pre-programmed in the control panel.
3.7.2 RS-232
P
ORT
The alarm control panel can be programmed through the RS serial port by means of
a special cable. In order to begin programming, enter the Communication menu and
select ÆLocal connection with…, then select the control panel type ÆCA5 – RS-232.
Start the FS 78 service function in the control panel. Conformity is required between the
communication passwords of panel and computer (FS 2 and FS 3) programmed in the
control panel and included in the DLOAD10 program data.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5

Satel CA-5 Additional guide - English - 20 pages

Satel CA-5 User Manual - English - 24 pages

Satel CA-5 Quick start guide - English - 12 pages

Satel CA-5 Additional guide - German - 20 pages

Satel CA-5 User Manual - German - 24 pages

Satel CA-5 Installation Guide - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info