699583
14
Zoom out
Zoom in
Previous page
1/20
Next page
12 Settings list CA-5
Notes:
Functioning of the type 10 output is described in the CA-5 U
SER
M
ANUAL
, Section
„Connection of Telephone Line”.
If active time equal to zero has been programmed for the type 1 (B
URGLARY ALARM
) or 14
(D
URESS ALARM
) output, the output will remain active until the alarm is cleared.
The active status of the D
URESS ALARM
output cannot be reset by using the user code
No.4, when the D
URESS
option has been selected (FS 8 option 1).
FS 82 OUT2 OUTPUT ALARM DELAY
|__|__|__|#
default|0|0|0|#
Program: from 0 to 255 (from 0 s to 1020 s).
To calculate the actual delay time, multiply the entered number by 4 seconds.
FS 83 OUT3 OUTPUT ALARM DELAY
|__|__|__|#
default|0|0|0|#
Program: from 0 to 255 (from 0s to 1020s).
To calculate the actual delay time, multiply the entered number by 4 seconds.
Note: The delay time programmed with the function FS 82 or FS 83 refers to the alarm
function output only.
FS 84 – OUTs OPTIONS
Nr
LED
Name of option
in LCD keypad
Set
option
Description of option
1 OUT1 polar.”-"
Polarization OUT1 reversed
2 OUT2 polar.”-"
Polarization OUT2 reversed
3 OUT3 polar.”-"
Polarization OUT3
4 OUT1-fire=burg.
Fire alarm on OUT1 as burglary one
(continuous signal)
5 OUT1 confirm.
Arming/disarming and clearing alarm signaled on OUT1
Notes:
With the option 1 selected, the –OUT1 terminal is shorted to the COM while in inactive
state, and is cut off from the COM while in active state.
With the option 2 or 3 selected, the OUT2 or OUT3 output is shorted to the ground in its
inactive state and cut off from the ground in its active state.
The fire alarm is normally signaled on the OUT1 output with an intermittent signal
(1sec./1sec.). When the option 4 is selected, the fire alarm will be signaled in the same
way as the burglary alarm i.e. with a continuous signal.
When switched on, the option 5 activates in the following situations the function of
generating short beeps on the OUT1 output:
one beep – arming,
two beeps – disarming (if there was no alarm),
four beeps – clearing alarm, or disarming and clearing alarm.
Option 4 in FS 79 (system options, part II) will limit signaling on OUT1 to arming/disarming
from the zone (e.g., by means of a remote control or button).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 Plus in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5 Plus

Satel CA-5 Plus User Manual - English - 24 pages

Satel CA-5 Plus Installation Guide - English - 27 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Additional guide - German - 20 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Installation Guide - German - 28 pages

Satel CA-5 Plus User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info