699583
16
Zoom out
Zoom in
Previous page
1/24
Next page
U
SER
M
ANUAL
CA-5
14
´
1. Change code
2. New user
New code:
7890
In the LED keypad the number of the lit up LED (1–5) indicates which access code is being
changed. When changing the master code or the service code none of the LEDs 1–5 is on.
EXAMPLE: changing the access code from 1234 to 7890.
[1][2][3][4][
*
] calling the "user function" mode, confirmed
with three short beeps and in the LED
keypad additionally with slow blinking of the
[PROGRAM] LED,
[1] [#] calling the "change code" function,
confirmed with two short beeps and in the
LED keypad additionally with fast blinking of
the [PROGRAM] LED (in the LCD
keypad this function may be called using []
or [#] keys),
[7][8][9][0][#] entering the digits of a new code and
accepting it, confirmed with four short beeps
and a long one – return of the control panel
to the normal operating mode.
6.3 A
DD USER
[CODE][
*
][2][#]
This function permits adding new users of the system (i.e. the access codes capable of
controlling the panel operation). It is only available to the Master code user.
As new users are added to the system, they are automatically assigned consecutive numbers
by the panel. If the function is called after the number of entered users has reached five, the
control panel will generate three long beeps and will quit the user function mode. If any of the
codes have been deleted by means of the function 3, the control panel will allow new user
access codes to be entered in their place.
After calling the function, the control panel waits for entering the new user access code (4 to
8 digits). Afterwards, the [#] key should be pressed.
In the LED keypad the number of the user code being programmed is indicated by blinking of
one of the LEDs 1 to 5. In the LCD keypad the number of the user code is displayed.
EXAMPLE: entering the new user access code = 4938
(master user access code = 7890).
[7][8][9][0][
*
] calling the "user function" mode, confirmed with three short beeps and in the LED
keypad additionally with slow blinking of the [PROGRAM] LED,
[2] [#] calling the "enter new user access code" function, confirmed with two short beeps,
and in the LED keypad additionally with lighting up of one of LEDs 1–5 and fast
blinking of the [PROGRAM] LED (in the LCD keypad this function may be called
with arrow keys),
[4][9][3][8][2][7] [#] entering the new code digits and accepting it, confirmed with four short beeps
and a long one – return of the control panel to the normal operating mode.
6.4 E
RASE
U
SER
[CODE][
*
][3][#]
The purpose of this function is to delete the access codes of existing users if the contents of
their code is lost, or to revoke the current users' authority to operate the security system. The
function is only available to the Master user.
After calling the function, the control panel will light up the LEDs with the numbers of current
user codes, and will display their numbers in the LCD keypad. Pressing the key with the digit
corresponding to the number of existing access code will extinguish the given LED (digit). In
order to delete selected access codes, it is necessary to extinguish their corresponding LEDs
(digits) and accept the selection with the [#] key. The LEDs (digits) indicate which access
codes will remain in the system after quitting the function.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 Plus in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5 Plus

Satel CA-5 Plus Additional guide - English - 20 pages

Satel CA-5 Plus Installation Guide - English - 27 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Additional guide - German - 20 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Installation Guide - German - 28 pages

Satel CA-5 Plus User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info