699583
15
Zoom out
Zoom in
Previous page
1/24
Next page
CA-5 SATEL
13
code, confirm it with the [
*
] key, select the function number and confirm it by pressing the
[#] key.
Refusal to perform the function is signaled with three long beeps (e.g. after calling the
function 2, when all the access codes are already entered).
6.1 S
TART
D
OWNLOAD
[CODE][
*
][0][#]
The function connects the control panel by telephone with the service computer (the
computer telephone number must be previously programmed by the installer) for remote
programming of the security system parameters and downloading the event memory log. The
function can be called by the master user and the service.
The computer program makes available to the computer operator a keypad working
simultaneously with the real keypads installed in the system, and provides detailed
monitoring of the system, including the status of its zones and outputs. The knowledge of the
users' access codes makes it possible to use the computer pad in the same way as any
additional system keypad (most of the user functions are available).
On activating the function, the panel engages the telephone line and connects to the service
computer. During the data exchange the telephone line will be busy. The service can
temporarily free the telephone line by suspending the downloading, and then calling the
control panel again to continue the data exchange. The installer should make the users
aware of it so that they will not answer the incoming calls to allow re-establishing of the
connection and correct completion of the transmission.
Connection between the control panel and the computer (after the panel is appropriately
programmed) can be initialized from outside by the computer calling the control panel, and
also can be effected by the installer in local mode using the corresponding service function.
The meaning of audible signals generated on activating the function:
three long beeps mean that the line is engaged by monitoring – wait and then repeat the
function calling attempt,
two long beeps mean lack of the programmed computer number or unavailability of the
function to the given user.
Notes:
The function enables connection between the panel and the computer, when the option to
establish communication from outside (from the computer) is blocked.
Initiation of the programming from the outside may be useful e.g. when the user is often
absent from the site, and there is an urgent need for service intervention or remote testing
of the security system .
Programming the computer telephone number (when the function initiating the
programming from the outside is available) is an extra safeguard against the panel being
accessed by any computer except the service one (in case unauthorized persons know the
communication access codes).
It is possible to block the service computer access to the control panel for the time of
armed mode.
6.2 C
HANGE ACCESS CODE
[CODE][
*
][1][#]
The function permits changing the access code of the user who has activated the function. It
is only unavailable to the user 4, if a specialduress actionauthority level has been selected
for him. Such an access code can only be changed by the master user by deleting and re-
entering it.
Having called the function, enter the new access code and press the [#] key.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-5 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-5 Plus in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel CA-5 Plus

Satel CA-5 Plus Additional guide - English - 20 pages

Satel CA-5 Plus Installation Guide - English - 27 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Additional guide - German - 20 pages

Satel CA-5 Plus User Manual - German - 24 pages

Satel CA-5 Plus Installation Guide - German - 28 pages

Satel CA-5 Plus User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info