699608
5
Zoom out
Zoom in
Previous page
1/15
Next page
CA-4v1 SATEL 3
Connection of power supply
1. Connect the 230V alternating voltage leads to the transformer terminals marked
"AC 230V".
2. Connect the output voltage wires of the transformer secondary winding to the "AC"
terminals on the control panel main board.
3. Connect the wire of the electric shock protection circuit to the terminal block
provided next to the transformer and marked with the ground symbol .
CAUTION!
As the control panel has no isolating switch to disconnect the mains supply, it is
important that the owner or the user of the security system be informed on how
the system is to be disconnected from the mains (e.g. by indicating the fuse
which protects the control panel supply circuit).
The panel on-board DC power supply default setting is 13.6–13.8V and should not be
changed.
Connection of keypad
The CA-4v1 control panel interfaces with LED keypads. The keypad should be
connected to the system with a four-wire line. If the panel is meant to work with several
keypads, they should be connected in parallel (up to tree keypads can be connected to
the panel with the guarantee of its error-free operation). The maximum distance
between keypads and the panel (assuming YTDY 6x0.5 wires are used) is 200m. Each
of the keypads should be power-fed with its own wire.
Figure 2 .Connection of LED keypad to the control panel
+KEY CLK DATA COM TMP TMP
AC AC AUX +OUT1- +OUT2- COM CLK DATA +KEY Z1 COM Z2 Z3 COM Z4
LED keypad
Control panel CA-4v1
to tamper circuit
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel CA-4v1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel CA-4v1 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info