699764
3
Zoom out
Zoom in
Previous page
1/9
Next page
The ASD-200 multisensor detector can detect the early stages of fire development when
there is some visible smoke and/or temperature rise. It is designed for operation within the
ABAX 2 / ABAX two-way wireless system. This manual applies to the detector with firmware
version 1.00, which is supported by:
ABAX 2:
– ACU-220 / ACU-280 controller,
ARU-200 repeater.
ABAX:
ACU-120 / ACU-270 controller (firmware version 5.04 or newer),
ARU-100 repeater (firmware version 2.02 or newer),
INTEGRA 128-WRL control panel (firmware version 1.19 or newer and firmware
version of processor used to operate ABAX system 3.10 or newer).
The detector is not a construction product as defined in Regulation (EU) No 305/2011
of the European Parliament and of the Council of 9 March 2011.
1 Features
Visible smoke sensor.
Detection of optical chamber fouling.
Heat sensor.
Built-in sounder.
Red LED for optical signaling.
Test feature.
Battery status control.
“ECO” option for longer battery life (ABAX 2 system only).
Encrypted two-way radio communication in the 868 MHz frequency band (AES standard
for the ABAX 2 system).
Transmission channel diversity – 4 channels for automatic selection of the one that will
enable transmission without interference with other signals in the 868 MHz frequency
band (ABAX 2 system only).
Remote update of detector firmware (ABAX 2 system only).
Tamper protection against enclosure opening.
2 Description
Radio communication
The detector connects to the controller / control panel at regular time intervals to provide
information about its state (periodical communication). Additional communication takes place
in the case of alarm (smoke / high temperature is sensed by the detector) or tamper (tamper
switch has been opened) and after restore of alarm (smoke / high temperature is sensed no
more by the detector) or tamper (tamper switch has been closed).
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel ASD-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel ASD-200 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel ASD-200

Satel ASD-200 User Manual - German - 10 pages

Satel ASD-200 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info