699622
6
Zoom out
Zoom in
Previous page
1/6
Next page
4 ACX-220 SATEL
9. Secure the enclosure base to the wall with wall plugs (screw anchors) and screws.
Proper wall plugs must be selected for the type of mounting surface (different for
concrete or brick wall, different for plaster wall, etc.).
10. Connect detectors to the expander zones. For the EOL configuration, use a 2.2 k
resistor, and for the 2EOL configuration – two 1.1 k resistors.
11. If the tamper switch is to be supervised, connect the tamper output terminals to the
expander zone (you can configure the zone as 2EOL and connect tamper output and
detector to it in series).
12. Connect the devices to the expander outputs.
Given the specific character of radio communication, it is not recommended that the
expander be used in applications where quick switchover of the output status is
expected.
13. Depending on the selected method of expander powering, connect the power supply unit
to the APS connector or connect the power leads to the +12V and COM terminals (use
flexible conductors with a cross-section of 0.5-0.75 mm
2
, or rigid conductors with a cross-
section of 1-2.5 mm
2
).
Never connect power supply to APS connector and terminals at the same time.
14. Replace the cover and then lock it with the screw.
15. Power up the expander.
16. Configure the expander settings (refer to ABAX 2 / ABAX controller manual or INTEGRA
/ VERSA series control panels programming manual).
Taking into account the requirements of EN50131-3 standard, enter 400 ms when
configuring the sensitivity of alarm zones.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel ACX-220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel ACX-220 in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel ACX-220

Satel ACX-220 Quick start guide - English - 2 pages

Satel ACX-220 User Manual - German - 6 pages

Satel ACX-220 Quick start guide - German - 2 pages

Satel ACX-220 User Manual - Dutch - 6 pages

Satel ACX-220 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info