783738
16
Zoom out
Zoom in
Previous page
1/18
Next page
Model: SF-101T Digitaler Thermostat
Merkmale der Funktion
Es ist ein intelligenter Controller in Mini-Größe
Temperaturanzeige / Temperaturkontrolle/ Wertespeicherung /
Selbstprüfung /Parameterverriegelung
1.
Stromversorgung: 220~240VAC, 50/60Hz
2.
Temperaturfühler: NTC, ein Sensor, 3,5m(L) (weder
positiv noch negativ)
3.
Angezeigter Temperaturbereich: -45℃~99℃ (-
49~210℉) Genauigkeit: ±1℃ (±2℉)
4.
Bereich der Solltemperatur: -45℃~99 (-49~210℉)
Werkseinstellung: 00℃ (32℉)
5.
Abmessungen:77 (L) × 35 (B) × 70 (T) mm
Einbaubohrung Abmessungen:71 (L) × 29 (B) mm
6.
Umgebungstemperatur: -10 ~ + 60℃ (14 ~ 140℉)
Relative Luftfeuchtigkeit: 20% ~ 90% (nicht
kondensierend)
7.
Belastbarkeit Relaisausgangs:
Kompressor: N. O. 30A/ 250VAC
Bedienung
1. Einstellung der Solltemperatur (Kompressor-
Stopptemperatur): „SET“ Taste drücken, die eingestellte
Temperatur wird angezeigt.
Drücken Sie die Tasten oder ▼, um den angezeigten Wert zu
ändern und zu speichern. Drücken Sie die „SET“ Taste um die
Einstellung zu verlassen und die aktuelle Kühlraumtemperatur
wieder anzuzeigen.
Wenn innerhalb von 10 Sekunden keine Taste mehr gedrückt
wird, wird die Kühlraumtemperatur wieder angezeigt.
(Einstellbereich der Solltemperatur: Parameter E1~E2)
2. LED: Während des Kühlvorgangs leuchtet die LED; wenn
die Kühlraumtemperatur konstant ist, ist die LED aus; während
des Verzögerungsvorgangs blinkt die LED.
3. Einstellung der Parameter
Drücken Sie die Taste „SET“ und halten Sie sie 6 Sekunden lang
gedrückt, um in den Parametereinstellungsmodus zu gelangen,
während E1 blinkt. Drücken Sie die Taste „SÉT“ erneut, um
nacheinander die Parameter E2, E3, E4, E 5, CF auszuwählen.
Drücken Sie die Taste oder ▼, der Wert des Parameters wird
angezeigt und kann geändert und gespeichert werden. Wenn
innerhalb von 10 Sekunden keine Taste mehr gedrückt wird,
kehrt das Gerät in den normalen Betriebsmodus zurück.
Model: SF-101T Digital Temperature Controller
Features of Function
It is a mini-sized and integrated intelligent controller.
Temperature Display/ Temperature Control / Value Storing/ Self
Testing /Parameter Locking.
Specifications
1. Power supply:220~240VAC, 50/60Hz.
2. Temperature sensor: NTC, one sensor, 3.5m(L) (Neither
positive nor negative).
3. Range of temperature displayed: 45℃ ~ 99℃. Accuracy:
±1℃
4. Range of set temperature: 45℃ ~ 99℃. Factory
default: 00℃
5. Dimension: 77 (Length) × 35 (Width) × 70 (Depth) mm.
Mounting hole dimension:71 (Length) × 29 (Width) mm
6. Temperature of the operating environment: 10℃ ~ 60
(14~140℉). Relative Humidity: 20%~90% (Non-condensing)
7. Relay output contact capacity:
Compressor : N. O. 30A/ 250VAC
Front Panel Operation
1. Set temperature (compressor stop temperature) adjustment.
Press “SET” button, the set temperature is displayed.
Press or button to modify and store the displayed value.
Press “SET” button to exit the adjustment and display the cold
room temperature.
If no more button is pressed within 10 seconds, the cold room
temperature will be displayed. (Set temperature adjustment
range: parameter E1 ~ E2).
2. Refrigeration LED: During refrigeration, the LED is on;
When the cold room temp. is constant, the LED is off; During
the delay process, the LED flashes. During timing turn off, the
LED flashes.
3. Parameter setup
Press “SET” button and hold for 6 seconds to enter the parameter
setup mode while E1 flashes. Press again “SET” button to select
sequentially from the parameters : E2, E3, E4, E5, CF.
Press or button, the value of parameter will be displayed
and can be modified and stored. If no more button is pressed
within 10 seconds, it will return to normal operation mode.
Parameter
Function
Set range
Default
E1
Lower set point
limit
45℃/
49℉
set temp.
35℃/
31℉
E2
Higher set point
limit
Set temp.
82℃/180
20℃ / 68
E3
Temp.
01
30℃ / 02
04℃ / 07
Paramete
r
Funktion
Einstellbereic
h
Standardwe
rt
E1
Untere
Sollwertgrenze
45℃ 35℃
E2
Obere
Sollwertgrenze
+ 82℃
+20℃
E3
Temp.-
01
30℃
04℃
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saro G885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saro G885 in the language / languages: English, German as an attachment in your email.

The manual is 1.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info