36
SETTING
Ceiling
When this function is “On,” the picture is top / bottom and left / right
reversed. This function is used to project the image from a ceiling
mounting the projector.
Rear
When this function is “On,” picture is left / right reversed. This
function is used to project the image to a rear projection screen.
Ceiling function
Rear function
Keystone
SETTING MENU
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT button(s) to move the
red frame pointer to the SETTING Menu icon.
1
2
Language
The language used in the ON-SCREEN MENU is available from
English, German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean, and Japanese.
Display
This function decides whether to display On-Screen Displays.
On ···· shows all the On-Screen Displays.
Off ···· sets On-Screen Displays disappeared except;
● ON-SCREEN MENU
● “Power off?” message
● P-TIMER
● “No signal” message
●“Wait a moment!" message
Set the red frame
pointer to the item
and press the
SELECT button.
Press the POINT DOWN button to move the red frame pointer to
the item that you want to set and then press the
SELECT button.
The Setting dialog box appears.
Blue back
When this function is “On,” the projector produces a blue image while
input signal is not detected.
Logo
When this function is “On,” projector displays our logo when starting
up.
When pressing the SELECT
button at Language, the
Language Menu appears.
Move the pointer to the item
and then press the POINT
LEFT/RIGHT button(s).
SETTING MENU
SETTING Menu icon
Terminal
The COMPUTER IN 2 / MONITOR OUT terminal on the back of the
projector can be used as computer input or monitor output by
switching Terminal with the POINT LEFT/RIGHT button.
To use the terminal as computer input, select Computer 2.
To use the terminal as monitor out, select Monitor out.
This function corrects the distorted image. Select either Store or
Reset, and then press the Select button. The keystone dialog box
appears. (Refer to page 20.)
Store ···· stores the keystone adjustment data even if the AC
Power Cord is disconnected.
Reset ····resets the keystone adjustment data when the AC
Power Cord is disconnected.
NOTE
● This terminal item cannot be selected when the
input source is selected as "Computer 2" in the
"SELECTING INPUT SOURCE" (P22).
