49
SETTING
SELECTING LANGUAGE
Press the MENU button and the ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT buttons to select
LANGUAGE and press the SELECT (REAR CLICK) button.
Another dialog box LANGUAGE Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the language that you want to set,
and then press the
SELECT (REAR CLICK) button.
1
2
The language used in the ON-SCREEN MENU is selectable
from among English, German, French, Italian, Spanish and
Japanese.
Move the Pointer to the
language that you want
to set, and then press
the SELECT (REAR
CLICK) button.
Remote control
This projector has two different remote transmit codes; the factory-set normal code (Mode 1) and the secondary code
(Mode 2). This switching function prevents the remote control operation mixture (jam) when operating several projectors
or video equipment together.
When operating the projector in “Mode 2” both projector and Remote Control must be switched to “Mode 2”.
To change the code of the projector;
Set the Remote control in the SETTING menu to “Mode 2”.
To change the code of the Remote Control;
Press both the MENU and the NORMAL buttons on the Remote Control together for over 10 seconds.
After changing the code, make sure the Remote Control operates properly.
To return to the normal code (Mode 1), operate both projector and Remote Control in the ways above again.
USB
Projector mode
Select " " when controlling the projector with the computer.
NOTE: Before you control the projector by computer, install USB driver (optionally sold parts) and set up the computer
following instruction in the USB driver package. Contact your authorized dealer.
This Projector is equipped with USB port for interactive operation between the projector and the computer. Set the mode
following steps below.
Wireless Mouse mode
Select " " when controlling the computer with the Remote Control of this projector.
Lamp replacement monitor timer
Be sure to reset the Lamp Replacement Monitor Timer when the Lamp Assembly is replaced. When the Lamp
Replacement Monitor Timer is reset, the LAMP REPLACEMENT indicator stops lighting.
Turn the projector on, and press the MENU button and the ON-
SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to
select SETTING and press the SELECT (REAR CLICK) button. Another
dialog box SETTING MENU will appear.
1
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to “Lamp age” and then press the
SELECT (REAR
CLICK) button.
2
NOTE; Do not reset the Lamp Replacement Monitor Timer, except after
the lamp is replaced.
Select [Yes] to reset the Timer.
4
Move the arrow to replaced lamp number and then press the
SELECT
(REAR CLICK) button. The message "Lamp replace monitor Reset?" is
displayed.
3
