33581
12
Zoom out
Zoom in
Previous page
1/40
Next page
12
USING THE AUDIO/VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect signal (cable) to splitter
.
2. Connect cable from splitter to the TV 75 (ohm) terminal .
3. Connect cable from splitter
to cable box .
4. Connect cable from cable box out
to VCR Antenna In terminal .
5.Connect DVD, VCR, DSS, or other equipment’s Audio Out (R/L) and Video Out to the
TV Audio Input (R/L) and Video Input
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L)
Input.
Note: Use either A/V1 or A/V2 Input jacks.
Optional
6. Connect DVD, VCR, DSS, or other equipment’s S-Video Out to the TV S-Video
In Jack
.
Note: Using the S-Video In 1 jack overrides the Video1 Input jack and the S-Video In 2
jack overrides the Video2 In jack (Model AVM-3680G).
7. Press POWER to turn on the TV. See
. Turn on external equipment also.
8. Press the VIDEO MODE key
to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW
for video.
A/V1 and A/V2
jacks have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
A solid Blue screen
with the word
Video1 or Video2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4).
You may be able to
use the remote
control to operate
your VCR, Cable
Box and TV.
(See page 7.)
UHF/VHF/CATV
75
AUDIO VIDEO
(MONO)
R
L
LR
AUDIO
VIDEO
(MONO)
LR
S-VIDEO IN -1
AUDIO
VIDEO
INPUT
1
S-VIDEO IN -2
AUDIO
VIDEO
INPUT
2
AUDIO
OUTPUT
FROM ANT.
OUT TO TV
R- -LAUDIO VIDEO
R- -LAUDIO VIDEO
A/V JACK
CH3 CH4
RF
CHANNEL
IN
OUT
IN
OUT
IN OUT
Back View
of a VCR
1
2 3
RESET
VIDEO
MODE
POWER
CABLEVCR TV
Remote Control
Splitter
Cable Box
TV A/V Input
Rear Jacks
(MODEL AVM-3680G)
DVD Player
USING THE AUDIO/VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect signal (cable) to splitter
.
2. Connect cable from splitter
to the TV 75 (ohm) terminal .
3. Connect cable from splitter
to cable box .
4. Connect cable from cable box out
to VCR Antenna In terminal .
5.Connect DVD, VCR, DSS, or other equipment’s Audio Out (R/L) and Video Out to the
TV Audio Input (R/L) and Video Input
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L)
Input.
Note: Use either A/V1 or A/V2 Input jacks.
Optional
6. Connect DVD, VCR, DSS, or other equipment’s S-Video Out to the TV S-Video
In Jack
.
Note: Using the S-Video In 1 jack overrides the Video1 Input jack and the S-Video In 2
jack overrides the Video2 In jack (Model AVM-3680G).
7. Press POWER to turn on the TV. See
. Turn on external equipment also.
8. Press the VIDEO MODE key
to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW
for video.
A/V1 and A/V2
jacks have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
A solid Blue screen
with the word
Video1 or Video2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Video jack. Check
connection, and
turn on external
1
2 3
RESET
VIDEO
MODE
POWER
CABLEVCR TV
Remote Control
DVD Player
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo AVM3680G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo AVM3680G in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info