489519
9
Zoom out
Zoom in
Previous page
1/40
Next page
9
A
A
D
B
C
A, B, C, D
B, C, D
B, D
1. Open the battery compartment cover.
2. Install two "AAA" batteries (supplied).
HOW TO INSTALL BATTERIES
Before using the remote control, batteries must first be installed.
3. Replace the battery compartment cover.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries
in this device:
Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh ones.
If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture. (Follow battery manufacturer's
directions.)
Use two "AAA" size batteries. The batteries may last approximately
one year depending on how much the remote control is used. For
best performance, it is recommended that batteries should be
replaced on a yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different types.
HOW TO USE THE REMOTE CONTROL
You may be able to use the remote control to operate
your VCR and Cable/Satellite box along with the Plasma
Display after the batteries are installed and you have
registered the codes that operate your products.
Some buttons are used exclusively for each product and
some buttons are used in common with each product.
To operate your products correctly using this universal
remote control follow each step below.
A. For PLASMA DISPLAY
Press the TV button first.
B. For VCR
Press the VCR button first.
C. For CABLE/SATELLITE box
Press the CABLE button first.
Aim remote at CABLE/SATELLITE box.
NOTES:
Some buttons that have same functions are called different
names according to the brand and model of the product. For
example, RESET may be called "CANCEL".
The buttons A, B, C and D are used exclusively for each
product. You can use these buttons whenever you want.
Press other buttons to operate the features of your
Plasma Display. You can use the VOL + and – buttons,
the 0-9 buttons.
Press other buttons to operate the features of your VCR.
You can use the VCR CH and buttons, the 0-9
buttons, the CH ENTER button.
Aim remote at VCR.
Press the POWER button.
Aim remote at Plasma Display.
Press other buttons to operate the features of your
CABLE/SATELLITE box. You can use the CH and
buttons, the 0-9 buttons, the CH ENTER button.
Press the POWER button to turn on your CABLE/SATELLITE box.
D. For DVD
Press the DVD button first.
Aim remote at DVD.
Press other buttons to operate the features of your DVD.
You can use the DVD SKIP 6 and 7 buttons, the
TOP MENU button, the DVD CLEAR button, the DVD
MENU button, the 0-9 buttons, the CH ENTER button.
Press the POWER button to turn on DVD.
Press the POWER button to turn on VCR.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Remote control
3V00101A_En_p02-11 6/2/05, 4:40 PM9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sansui HDPDP4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sansui HDPDP4200 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info