489519
8
Zoom out
Zoom in
Previous page
1/40
Next page
8
Remote control
10. VCR Operation Buttons* - Press to operate your
VCR if programmed properly using a code listed on
page 10.
11. DISPLAY Button - When you press this button, the
input source will appear on the lower right corner of
the screen. Press the button again to remove display
from the screen.
12. MUTE Button - To turn off the sound, press this
button once. The Plasma Display will be silenced and
the symbol "MUTE" will appear on the screen. The
muting feature can be released by pressing the
MUTE button again or one of the VOL (VOLUME) +
or buttons.
13. QUICK VIEW Button - This button allows you to go
back to the previous input source selected by just
pressing the QUICK VIEW button. Press this button
again to return to the channel you were watching.
14. +10/CH ENTER Button* - Some connected equip-
ment such as a Cable/Satellite box, VCR, or DVD
may require this button to input selected channels.
15. VOL (VOLUME) + / – Buttons - Press the
button
to increase, or the
button to decrease the sound
level.
16. ENTER Button - Use to enter or select information
for On-Screen operations.
17. EXIT Button - Press to remove setup menu.
18. INPUT SELECT Button - Press to display SOURCE
SELECTION menu.
19. PICTURE SIZE Button - Press to display PICTURE
SIZE menu.
20. DVD Operation Buttons* - Press to operate your
DVD if programmed properly using a code listed on
page 10.
1. PLASMA DISPLAY, VCR, CABLE, DVD POWER
Button* - Used to turn the Plasma Display, VCR,
Cable/Satellite box or DVD on or off after you select
the operating mode on step 9.
2. SLEEP Button - To set the Plasma Display to turn
off after a preset amount of time, use the SLEEP
button on the remote control.
3. Direct Channel Selection Buttons (0-9)* - Allows
direct access to any channel of the VCR, Cable/
Satellite box or DVD.
4. CH (CHANNEL)/CURSOR / Buttons* - Used to
operate the menu functions of the Plasma Display,
and to change the channels of a Cable/Satellite box.
5. MENU Button - Use to display the On-Screen menu
function.
6. RESET Button - Press to reset the On-Screen
picture adjustments to their factory preset positions.
7. CLOSED CAPTION Button - Press this button to
switch between normal mode and the two Closed
Caption modes (captions and 1/2 of full screen text).
Closed Captioning will display text on screen for
hearing impaired viewers.
8. CODE SET Button - Used to register the 2-digit
codes to operate your VCR or Cable/Satellite box.
Press this button and the VCR button or the CABLE
button simultaneously to start a registration (See
page 10).
9. TV, VCR, CABLE, DVD Selector Buttons - Press to
select the Plasma Display, VCR, Cable/Satellite box
or DVD to be operated.
* You can use these buttons to operate
your VCR, Cable/Satellite box or DVD
after you have programmed the re-
mote control for the code that oper-
ates your VCR, Cable/Satellite box or
DVD (see page 10 and 11).
2
3
15
4
11
13
17
1
7
6
5
8
20
19
18
16
9
12
14
10
3V00101A_En_p02-11 6/2/05, 4:40 PM8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sansui HDPDP4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sansui HDPDP4200 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info