626696

Sanitas SIL 45 Manual

11
Zoom out
Zoom in
Previous page
1/32
Next page
11
Preparing for treatment
•
Arrange yourself in front of the unit so you can relax
and enjoy the treatment of the part of the body con-
cerned.
•
Tilt the lamp so the unit is angled directly at the part
of the body being treated.
•
The distance to the infrared radiant heater depends
largely on personal heat sensitivity and the treatment
concerned.
•
Make sure the distance between the infrared radi-
ant heater and the part of the body being treated
is not less than 30 cm!
Do not use the unit for more than 15 minutes at a time
(risk of overheating). Allow the unit to cool down before
you use it again.
Treatment duration
Important
•
Risk of burns: Remove any metal items, e.g. belt
buckles, necklaces, bras, jewellery or piercings, from
the treatment area before switching on the device as
they can become very hot.
We recommend short treatment times at the beginning.
However, even when the unit is used correctly, the skin
of some people can have an oversensitive or allergic
reaction to the heat treatment (e.g. intense redness,
blisters, itching, heavy sweating).
Starting the unit
Important
•
Always close or cover your eyes when radiating the
face.
•
Press the On/Off switch (3)
•
The unit will turn on automatically after a short time.
•
Set the time selector (5) to the desired duration (1 to
15 minutes).
•
You can press the time selector (5) during operation
to reset the treatment duration.
•
The infrared radiant heater switches off automatically
after the set time.
•
For an additional treatment, you only need to press
the time selector (5) to reset your individual treatment
time.
Important
•
Do not touch the hot glass.
•
To end treatment, use the On/Off switch (3) and dis-
connect the power plug.
During treatment
•
Examine the part of the body treated frequently and
check for skin reactions. Cease exposure immedi-
ately if there are any signs of oversensitivity or an
allergic reaction, and consult a doctor.
•
The unit can be switched off at any time using the
On/Off switch (3).
•
Do not cover up or pack the unit away while it is
warm.
After treatment
•
Switch off the unit at the On/Off switch (3).
•
Pull the mains plug out of the socket.
6. Cleaning, changing the infrared
lamp and storage
Cleaning
Important
Before cleaning the unit, switch it off, unplug it and
allow it to cool down completely.
Important
•
Ensure that no water enters the unit!
•
Do not wash the unit in a dishwasher!
The unit can be cleaned with a damp cloth. Do not use
cleaning agents.
Changing the infrared lamp
Remember that a faulty lamp should only be replaced
with a lamp of the same type.
Replacement lamp
Type: Halogen lamp 220 - 240V / 300 W
118 mm long for R7S socket
Original Order no. 162.620
Warning
Danger of an electric shock!
•
Before changing the lamp, make sure the power ca-
ble is unplugged from the socket.
•
Risk of burning on hot surfaces!
•
Allow the unit to cool completely before any repairs.
•
Lamps are not covered by the guarantee.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas SIL 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SIL 45 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info