626696
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
S
et-up
Important
Place the unit on a solid and even surface.
The unit must not be set up on a slope or laying
down.
The minimum distance between flammable items
and the infrared lamp must not be less than 1 metre.
Please make sure the unit is not placed on flammable
materials such as table cloths or carpets.
Do not leave any easily flammable or meltable items
close to the unit.
Do not hang the unit on the wall or from the ceiling.
Do not use the unit in the open air.
Protect the unit from strong impacts.
Before starting
Important
Before you use the unit for the first time, remove all
packaging materials.
Check the unit for signs of use or damage. If in doubt
and the unit is damaged, do not use it and contact
your dealer or the customer service address pro-
vided.
The manufacturer is not liable for damage caused by
improper or incorrect use.
Protect the unit from dust, dirt and moisture.
Repairs
Warning
Danger of an electric shock!
Open the unit only to change the lamp. Do not at-
tempt to repair the unit, otherwise problem-free op-
eration cannot be guaranteed. Failure to observe this
condition will void the warranty.
For repairs, contact Customer Service or an author-
ised dealer.
4. Unit description
Overview
Item Name
1
Swivelling body with handles
2
Disc
3
On/Off switch
4
Remaining time display
5
Time selector
6
Foot with integrated cable channel for coiling the
power cable.
Infrared radiant heater with adjustable timer (1 to 15
minutes) and swivelling body (0 to 50 degrees).
The timer switches off automatically at the end of the
set time.
The swivelling body allows you to adjust the infrared
radiant heater to suit your needs.
5. Operation
Unpacking and set-up
Warning
Remove all packaging materials before using the
unit.
Unwind the power cable fully.
Place the unit on a solid and even surface.
Maintain a distance of at least 1 metre from other
objects, both to protect the unit itself from overheat-
ing and to prevent the risk of fire or burning.
Do not hang the unit on the wall or from the ceiling.
Insert the mains plug in the socket.
Switch on the unit at the On/Off switch (3). The re-
maining time display (4) shows 15 minutes.
Warning
Do not bump the unit while it is operating or cooling
down or you could damage the lamp.
Set the desired treatment time (1 to 15 minutes) by
pressing the time selector (5) several times.
The set time will appear on the display (4).
min. 1 m
1
2
3
4
6
5
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas SIL 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SIL 45 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info