Manual Sanitas SIL 06 (page 9 of 24) (English, German, French, Italian)

626648

Zoom out

Zoom in

1/24

3. Initial use

Setup

Remove the unit from the packaging. Remove all packaging material before using the appliance. Before use,

check whether the infrared lamp is properly screwed in. Place the device on flat surfaces. The appliance has an

adjustable lampshade. Set the angle of the fluorescent screen in accordance with your individual requirements.

Mains connection

Connect the unit only to the mains voltage listed on the type plate.

Note:

• Ensure that there is a socket near the place where the lamp will stand.

• Lay the mains cable in such a way that no one can trip over it.

4. Operation

1 Switching on the lamp

 Push the plug completely into the mains socket.

2 Enjoying the light

While using the lamp on the face, always keep the eyes closed in order to avoid injury to the eyes (do not

look directly at the infrared light).

The recommended duration of treatment is maximum 12 minutes. We recommend selecting a shorter

radiation period to start with. However, the skin of some people may show an over-sensitive (e.g. with

extreme redness, blistering, itching, heavy sweating) or allergic reaction to heat radiation, even when the

lamp is used correctly.

3 Important instructions

The distance between the infrared lamp and the radiated part of the body should not be less than the

following:

SIL 06: at least 24 in (60 cm)

SIL 16: at least 32 in (80 cm)

Basically,

examine the radiated section of the body regularly. Discontinue radiation immediately if any signs of an

over-sensitive or allergic reaction appear and consult a physician.

4 Switching off the lamp

 Pull the mains plug from the socket.

CAUTION!

The lamp is hot after being used. Let the lamp cool off first long enough before you put it

away and/or pack it up!

Please note that the mains cable must not be wound round the infrared lamp either for storage or when

in use.

5. Changing the infrared lamp

The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and chan-

ging the infrared heat lamp.

Please note that only infrared lamps of the original type may be used as replacements.

Appliance: Replacement infrared lamp (type): Speciﬁcations:

Item number:

SIL 06 Infrared R95 (100 W) 230V ~ 50 Hz 614.51

SIL 16 Infrared PAR 38 (150 W) 230V ~ 50 Hz 616.51

Warning

• Do not touch the infrared lamp or unscrew it when it is connected to the mains.

• Unplug the device, to avoid the risk of electrocution.

• In the interest of environmental protection, do not dispose of the device in haousehold waste.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SIL 06 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sanitas SIL 06 Manual

Product: