472149

Sanitas SBC 27 Manual

13
Zoom out
Zoom in
Previous page
1/40
Next page
13
5. Measuring blood pressure
Positioning cuff
•
Bare your left wrist, making sure that the circulation in the
arm is not restricted by any clothes etc. that are too tight.
Position the cuff on the inside of your wrist.
•
Fasten the cuff with the Velcro fastening so that the upper
edge of the monitor is positioned approx. 1 cm below the
ball of your thumb.
• The cuff has to be fitted tightly around the wrist but should
not constrict it.
Correct posture
•
Rest for approx. 5 minutes before each measurement. Oth-
erwise there may be divergences.
•
You can perform the measurement ei-
ther sitting or lying down. It is essential
to support your arm and have it at an
angle. Always make sure that the cuff
is level with your heart. Otherwise there
may be serious divergences. Relax
your arm and the palms of your hands.
•
In order not to distort the result, it is important to keep still
during the measurement and not talk.
Select memory
Switch on the blood pressure monitor with the button. Select
the required memory space by pressing the function key “+”.
You have two memories (60 memory spaces each) in order to
save the test results of 2 different people separately, or else
save measurements in the morning and evening separately.
Measuring blood pressure
•
Put on the cuff as described previously and assume the posi-
tion in which you want to carry out the measurement.
•
Using the buttons , select the user memory 1 or 2. Start the
measurement process by pressing button . After checking
the display with all digits lighting up, the monitor will automati-
cally inflate. Following the self-test, during which all display
elements briefly appear, the measurement begins. During
inflation the device already determines measured values used
to estimate the required inflation pressure. If this pressure is
insufficient, the device automatically inflates by another.
•
Then the pressure in the cuff is slowly released and the pulse
is measured.
•
When the measurement has been completed, the remain ing
air pressure is released very quickly. The pulse, the systolic
and the diastolic blood pressure are displayed.
•
You can interrupt measurement at any time by pressing the
button .
•
The E_ icon appears if it has not been possible to perform
the measurement properly. Observe the section in these in-
structions on error messages/troubleshooting and repeat the
measurement.
•
The device switches off automatically after 1 minute.
W
ait at least 5 minutes before taking another measurement!
• • • • • • • • • • • • •
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanitas SBC 27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanitas SBC 27 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info