797031
16
Zoom out
Zoom in
Previous page
1/21
Next page
15
When the alarm sounds
To cancel a sounding alarm, press the standby button.
When the buzzer alarm activates, the alarm will start softly and
gradually increase in level. It will sound for 1 minute and silence for
1 minute in repetition for 60 minutes unless cancelled. The radio will
sound non-stop at the selected time for up to 60 minutes for other alarm
types.
Snooze function
1. When the alarm sounds, press any button other than the standby
button will silence the alarm for 5 minutes. The symbol for snooze will
appear and ash on the display. The Alarm icon will also ash on the
display.
2. To adjust the silence time for the snooze timer, press and release the
Menu button to enter the menu setting.
3. Rotate the Tuning control knob until “SNOOZE X” appears on the
display, then press and release the Select button to enter the setting.
The digit “X” will ash, rotate the Tuning control knob to adjust the
silence time from 5, 10, 15 and 20 minutes for the snooze timer.
Press and release the Select button to conrm the setting.
4. To cancel the snooze timer while the alarm is suspended, press and
release the standby button.
Disabling / cancelling alarms
To disable an active alarm before the alarm sounds, press and hold the
corresponding alarm button until there is a beep sound to cancel the
alarm. The BUZZER or Radio alarm icons will disappear.
Sleep function
Your radio can be set to turn off automatically after a preset time has
elapsed. The sleep timer setting can be adjusted between 15,30, 45,
60, 90 and 120 minutes. Ensure your radio is switched off.
1. To set the desired sleep time, press and hold the standby button to
enter the Sleep timer setting. ‘SLEEP XX’ will show on the display.
2. Keep pressing the standby button and the Sleep timer options will
start switching on the display. Stop until the required Sleep timer
setting appears on the display. The setting will be saved and the LCD
will return to normal display.
3. Your radio will switch off automatically after the preset sleep timer
has elapsed. The sleep timer icon will show on the display indicating
an active Sleep timer.
4. To cancel the sleep timer function before the preset time has
elapsed, simply press and release the standby button to turn the unit
off manually.
Loudness function
The loudness effect will be more audible when the radio is in lower
volume level to get compensation on lower frequencies.
1. Press and release the Menu button to access the menu for the
current mode.
2. Rotate the Tuning control knob to select “LOUD ON” option. The
loudness function is applied.
3. To turn off the loudness function, press and release the Tuning
control knob when the display shows “LOUD ON”. The “ON” will
ash, rotate the Tuning control knob to select “OFF” and press the
Select button to conrm the setting.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WR-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WR-50 in the language / languages: English as an attachment in your email.

The manual is 1.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info