797031
9
Zoom out
Zoom in
Previous page
1/21
Next page
8
GB
FM/AM Bandwidth narrowing
In order to obtain better reception of weaker FM/AM stations, your
radio has a function to narrow the FM/AM bandwidth to reduce high
frequency noise.
1. Select the FM band or AM band by pressing the Source button.
2. Press and release the Menu button, then rotate the Tuning control
knob until “FM WIDTH” or “AM WIDTH” shows on the display. Press
and release the Select button, the “WIDTH” will ash and then rotate
the Tuning control knob until “NARROW” appears and ashes on the
display .Press and release the Select button to conrm the setting.
3. To return to width, press and release the Menu button, then rotate the
Tuning control knob until “FM NARROW” or “AM NARROW” shows
on the display. Press and release the Select button, the “NARROW”
will flash and then rotate the Tuning control knob until WIDTH
appears and flashes on the display. Press and release the Select
button to conrm the setting.
Note: Sangean suggests activating the “NARROW” when listening to
talk Radio programs. This may improve sound quality. Please note that
activation of the “NARROW” may cause Stereo invalid and produce
mono sound.
Presetting stations – FM/AM
You may store your preferred FM and AM radio stations to the preset
station memories. The procedure for setting presets and using them
to tune stations is the same for FM and AM modes, and is described
below. Please note that 9 memory presets for each band can be
accessed via remote control.
1. Press and release the standby button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button, the corresponding “Px”
will appear and ash. Continue holding down this button until radio
beeps once. The station will be stored under the chosen preset
number. Repeat this procedure for the remaining presets.
Note: Stations stored in preset memories may be overwritten by
following the above procedure.
Recalling a preset station- FM/AM
1. Press and release the standby button to switch on your radio.
2. Select the required frequency band by pressing the Source button.
3. Momentarily press and release the required Preset button, your radio
will tune to the station in preset memory.
Note: The display will show ‘Empty Px’ if no station has been stored to
that preset.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WR-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WR-50 in the language / languages: English as an attachment in your email.

The manual is 1.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info