797030
7
Zoom out
Zoom in
Previous page
1/19
Next page
06
GB
8 T U V t u v
9 W X Y Z w x Y z
4. GETTING STARTED
CONNECTING THE AC POWER ADAPTER
The WFR-32 can be powered using the supplied power
adapter. Before connecting the AC power adapter to a
wall socket, please ensure that the voltage that the socket
supplies is within the supported range (100~240 Vac,
50/60Hz).
If the wall socket does supply a voltage that is within the
supported range, first connect the small plug of the power
cord to the DC IN socket (18) on the radio, then connect
the AC power adapter to the wall socket and turn on the
Power Switch (19) at the back of the radio.
INITIAL SETUP
After the radio has been supplied with power, it will
automatically turn on. “Sangean” will be shown on the
radio’s display (12) and a bar below this message will
indicate the progress of the startup process.
Once the radio has finished starting up, it will immediately
switch over to the initial setup process. During the initial
setup process, the startup wizard will guide you through
the configuration of the language of the on-screen menus
and the network configuration of the radio.
SETTING THE MENU LANGUAGE
Once the language selection 22:36
1/18
English
Deutsch
Español
Français
menu appears on the display.
The English language is the
default language and is
therefore highlighted by default.
Select the desired language as
described previously in the
“NAVIGATION AND TEXT
INPUT” section in chapter 3. After selecting the desired
language, the radio will display all menus in the selected
language.
THE MOBILE APP’S PRIVACY POLICY
Next, the radio will display a QR 12:00AM
Scan QR code or Visit:
WWW.mediayou.net
/policy.php
Privacy
:OK
code and the URL
https://www.mediayou.net/
policy.php to direct you to the
Privacy Policy.
Be sure to read this Policy
before using the online
functionality of the radio and only use the internet radio
feature if you agree to all terms and conditions in the
Privacy Policy. If you do not agree, do not use the internet
radio feature and use the radio for playback in other
modes instead.
Press the Volume control (4) or Enter button (s) to
continue setting up the radio using the setup wizard.
CONFIGURING THE NETWORK
CONNECTION
When configuring the network 12:00AM
Enable ’Check Network
when Power On’ ?
No
Yes
connection, the first question
the setup wizard will ask is
whether you want it to check for
network connections when your
turn the radio on. There are two
options here:
1. Yes: The radio will automatically scan for Wi-Fi
networks when it is turned on and it is not or cannot
connect to networks it has previously connected to.
2. No: The radio will not automatically scan for Wi-
Fi networks when it is turned on and is not already
connected to a network that it has previously connected
to. In this case, you will have to connect to a network
manually using the radio’s menu.
Next, the wizard will ask if you 12:00AM
Would you like to
configure Network now?
YesAPP WPSNo
want to configure the network
now. There are four options to
choose from here:
1. Yes: The radio will scan for
nearby Wi-Fi networks. After
scanning is completed, select
your network from the list and enter the password as
previously described. After entering the password, the
radio will connect to the network. The setup wizard has
now been completed and the radio will switch over to
the main menu.
2. APP: This option will display a QR code that, when
scanned, takes you to a page with instructions on
how to install the AirMusic Control mobile app on your
Android or iOS device and how to then connect the
radio to your Wi-Fi network. Follow these instructions
to successfully connect the radio to your Wi-Fi network.
After the radio has been connected to the network, the
setup wizard has been completed and the radio will
switch over to the main menu.
3. WPS: If your router supports WPS (refer to the
instruction manual of your router), you can also use the
WPS feature to connect the radio to your Wi-Fi network.
After selecting WPS, press the WPS button on your
router within 120 seconds to establish a connection
between the 2 devices. Once the connection is
established, the setup wizard is now completed and the
radio will switch over to the main menu.
4. No: Select no if you do not want to connect the radio
to the Wi-Fi network at this point in time. When not
connected to a Wi-Fi network, the radio can still be
used to playback audio in both the Bluetooth and the
Aux in mode. In addition, the radio can be connected to
a Wi-Fi network at any time by using the menus on the
radio.
After finishing this step, the setup wizard is completed.
The radio’s time and date will automatically be set if you
have connected to a Wi-Fi network and your radio is
now ready for use.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean WFR-32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean WFR-32 in the language / languages: English as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean WFR-32

Sangean WFR-32 User Manual - German - 20 pages

Sangean WFR-32 User Manual - Dutch - 20 pages

Sangean WFR-32 User Manual - French - 21 pages

Sangean WFR-32 User Manual - Spanish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info