797015
8
Zoom out
Zoom in
Previous page
1/12
Next page
7
GB
Scan tuning AM/FM
1. Fully extend the FM wire antenna located on the rear of your clock radio. Place the wire antenna
so that it is as straight as possible extending either above or below the radio.
2. Press the Standby button to turn on your radio.
3. Press the Source button repeatedly to select AM (MW) or FM 1 or 2 frequency band.
4. Press and hold the Tuning up/down button. Your radio will scan in an upwards direction (low frequency
to high frequency) or downwards direction (high frequency to low frequency) and stop automatically
when it nds a station with sufcient signal strength.
Presetting AM/FM stations
1. Press the Standby button to turn on your radio.
2. Press the Source button repeatedly to select AM (MW) or FM 1 or 2 frequency band.
3. Tune into the station that you would like to preset following the steps above.
4. Press and hold one of preset buttons until the radio beeps, the station frequency will be saved into
the chosen preset.
5. Repeat the procedure for the remaining presets. Your radio has 5 presets for each frequency band.
6. The presets can be overwritten by following the above steps.
Recalling AM/FM stations
1. Press the Source button for AM or FM 1 or 2 frequency band
2. Press and release one of the Preset buttons and the preset number and frequency will appear on
the display.
FM stereo/mono
If the FM radio station being listened to has a weak signal, some hiss may be audible. It is possible
to reduce this hiss by forcing the radio to play the station in mono rather than stereo.
Press and hold the Display button to switch to mono. The LCD displays Stereo icon will disappear.
Setting the alarm
There are two alarms which can each be set to wake you to AM/FM radio or buzzer alarm. The
alarms may be set while the unit is off or while playing. Ensure that the time is set correctly before
setting the alarms.
1. Before setting an alarm ensure the clock time is set. Press and hold any of the Alarm button until
the radio beeps. You’ve now entered the alarm setting (e.g. Alarm 1 button to enter the alarm 1
setting).
2. The hour setting of alarm 1, for example, will begin to ash. Press the Tuning up/down button to
select the required alarm hour, and press the current setting alarm button (e.g. Alarm 1) to conrm
the setting. Press the Tuning up/down button to select the required alarm minute, and press the
Alarm button to conrm the setting.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean RCR-24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean RCR-24 in the language / languages: English as an attachment in your email.

The manual is 0.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean RCR-24

Sangean RCR-24 User Manual - German - 12 pages

Sangean RCR-24 User Manual - Dutch - 12 pages

Sangean RCR-24 User Manual - French - 12 pages

Sangean RCR-24 User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info