797012
8
Zoom out
Zoom in
Previous page
1/15
Next page
7
Presetting stations
There are 10 presets each for FM and AM radio. They are used the same way for each operating
mode.
1. Press the Standby/Power button to switch on your radio.
2. Tune to the required radio station as previously described.
3. To store the station as a preset, press and hold the Preset button and the display will show
“Preset Store”.
4. Press and release the required preset number button. You will hear a beep and the station
will be stored under the chosen preset. The display will show “Preset 3 stored”, for example.
Repeat this procedure as needed for the remaining presets. Alternatively, you can rotate the
Tuning control knob to choose your required preset number and press the Tuning control knob
to conrm your selected preset number. You can also press and hold the Preset button(1-10)
on the remote control to store the station as a preset.
5. Stations which are already stored in the presets may be overwritten by following the above
procedure.
Recalling a preset station
1. Press the Standby/Power button to switch on your radio.
2. Select the required operating mode using the Mode button.
3. Momentarily press the Preset button and then press the required preset number. Your radio
will then tune to the station stored in the selected preset memory. The chosen preset number
is shown in the upper area of the radio display, e.g. ‘M3’. Alternatively, you can press the
Preset button and rotate the Tuning control knob to select your required preset number. Then,
press the Tuning control knob to tune to the station stored in the selected preset memory. You
can also press and release the Preset button(1-10) on the remote control to tune to the station
stored in the selected preset memory.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDT-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDT-20 in the language / languages: English as an attachment in your email.

The manual is 1.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info