797012
6
Zoom out
Zoom in
Previous page
1/15
Next page
5
Power your radio
1. Connect the power cable with the radio and plug it in to a live outlet.
2. Connect the FM Dipole Antenna into the FM antenna terminal.
3. Connect the AM loop antenna into AM antenna terminal.
4. Press the Standby/Power button to turn on the radio.
Note:
1. Use only the power cable/ FM Dipole antenna / AM loop antenna
supplied with the radio. Connecting an incompatible power supply
and antennas will cause permanent damage to the radio.
2. The AM loop antenna should be located at least 20”away from the
tuner to avoid possible interference.
IMPORTANT:
The mains plug is used as the means of connecting the radio to
the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains plug should be removed from the mains
outlet completely.
Setting the clock
Clock setting can be done when the receiver is on or in Standby Mode
(power off).
Setting the clock manually
1. Repeatedly press the Menu button until ‘Clock Update’ is shown on
the display.
2. Rotate the Tuning control knob to select ‘Manual’ and press the
Tuning control knob to enter the clock time setting. The hour digit will
be highlighted on the display.
3. Rotate the Tuning control knob to set the desired hour. Then press
the Tuning control knob to conrm the setting. The minute digit will be
highlighted on the display.
4. Rotate the Tuning control knob to set the desired minute and press
the Tuning control knob to conrm the setting. Now the month digit
will be highlighted on the display.
5. Follow the steps above to set the month/day/year setting. When the
clock time setting is completed, your radio will exit the menu.
Auto clock set mode
1. Repeatedly press the Menu button until ‘Clock Update’ is shown on
the display.
2. Rotate the Tuning control knob to select ‘Auto’ and press the Tuning
control knob to confirm the setting. Your radio will synchronize its
clock time whenever it tunes to a radio station using RDS with CT
signals.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDT-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDT-20 in the language / languages: English as an attachment in your email.

The manual is 1.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info