797367
6
Zoom out
Zoom in
Previous page
1/15
Next page
05
GB
E
3. Press the Band button repeatedly to select the desired frequency band.
4. To scan up in frequency, rst rotate the Tuning control knob in a clockwise direction and then press the Tuning
control knob. Your radio will scan in an upwards direction (low frequency to high frequency) and stop automatically
when it nds a station of sufcient strength. To scan down in frequency, rst rotate the Tuning control knob in an
anti-clockwise direction and then press the Tuning control knob. Your radio will scan in a downwards direction and
stop automatically when it nds a station of sufcient strength.
5. After a few seconds the display will update. The display will show the frequency of the signal found. If the signal is
strong enough and there is RDS / RBDS data present then the radio will display the station name.
Manual tuning – FM / AM
1. Press the Power button to switch on your radio.
2. Press the Band button repeatedly to select the desired frequency band.
3. Rotate the Tuning control knob to tune to a station. The frequency will change in steps of 50kHz / 100kHz /
200kHz in FM or 9kHz / 10kHz in AM.
4. When the frequency band end is reached the radio will recommence tuning from the opposite frequency band
end.
5. Adjust the Volume control to the desired volume settings.
6. To switch off your radio press the Power button.
If your radio has any interference in the AM band because of its adaptor, please move your radio away from its AC
adaptor at least 12”.
NOTE
Presetting stations
There are 20 presets (4pages x 5presets) each for FM and AM radio. They are used the same way for each operating
mode.
1Press the Power button to switch on your radio.
2Tune to the required radio station as previously described.
3To store the station as a preset, press the Page button to select the
required preset page 1 to 4 and then press and hold the required preset
button (1-5) until you hear a beep and the display will show the page and
the memory pre-set you selected. e.g. “ ”.
4Stations which are already stored in the presets may be overwritten by following the above procedure.
Recalling a preset station
1. Press the Power button to switch on your radio.
2. Select the required operating mode using the Band button.
3. Press the Page button to select the required preset page and momentarily press the required Preset button, your
radio will tune to the station stored in the selected preset memory. The chosen preset number is shown in the
upper right hand side of the radio display, e.g. “ ”.
The display will show "Preset xX Empty" if no station has been stored to that preset.
NOTE
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDR-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDR-16 in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info