797367

Sangean HDR-16 Manual

5
Zoom out
Zoom in
Previous page
1/15
Next page
04
GB
E
Auto clock set mode
1. Press the Power button to switch on your radio.
2. Press the Band button to select FM radio mode.
3. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “RBDS
Auto CT” is shown on the display. Press the Tuning control knob to enter the setting.
4. Rotate the Tuning control knob to select “Auto” and press the Tuning control knob to conrm the setting. Your
radio will synchronize its clock time whenever it tunes to a radio station using RDS / RBDS with CT signals. The
symbol “CT” will appear on the display indicating the radio time is RDS / RBDS clock time.
5. If you wish to cancel the “RBDS Auto CT” function, press and hold the Menu button and then rotate the Tuning
control knob until “RBDS Auto CT” is shown on the display. Press the Tuning control knob and rotate the Tuning
control knob to select “Manual”. Press the Tuning control knob to conrm the setting. Please refer to the later
section “Setting the clock manually” to set the clock time and date.
1. If the clock time was not auto adjusted within 24 hours, the symbol “CT” will disappear on the display.
2. If clock time from local RDS / RBDS station is not correct, you should consider disabling the “RBDS Auto CT”
function.
3. Please note that at times the RDS / RBDS signal may broadcast the wrong time, this is the fault of the radio
station and not your radio.
NOTE
Setting the clock manually
When choosing manual setting as the clock time setting of your radio, the “RBDS Auto CT” function will be disabled.
1. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “Clock” is
shown on the display.
2. Press the Tuning control knob to enter the time setting. The hour digit will ash on the display.
3. Rotate the Tuning control knob to set the desired hour. Then press the Tuning control knob to conrm the setting.
The minute digit will ash on the display.
4. Rotate the Tuning control knob to set the desired minute and press the Tuning control knob to conrm the setting.
Now the month digit will ash on the display.
5. Follow the steps above to set the month / day / year. When the time and date setting is completed, the display will
show “Clock Saved”.
Setting the time format
1. Press and hold the Menu button to enter the menu setting and then rotate the Tuning control knob until “12 / 24
hour” is shown on the display.
2. Press the Tuning control knob and rotate the Tuning control knob to select 12 or 24 hour format. Press the Tuning
control knob to conrm the setting. The selected format is used in standby mode, in playing mode and when
setting the alarms.
Operating the radio
This radio is equipped with three tuning methods – Scan tuning, Manual tuning, Memory presets recall.
Scan tuning FM / AM
1. Make sure the telescopic antenna is set up in advance.
2. Press the Power button to switch on your radio.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean HDR-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean HDR-16 in the language / languages: English as an attachment in your email.

The manual is 1.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info