797046
16
Zoom out
Zoom in
Previous page
1/19
Next page
15
‘Weekends’: the alarm will sound only at weekends
‘Weekdays’: the alarm will sound on weekdays only
‘Daily’: the alarm will sound everyday Press the Select button
to conrm the setting.
8. Press the Tuning up/down button to choose the desired alarm
source (DAB, FM, Buzzer).
Press the Select button to conrm the setting. If setting alarm
to Buzzer proceed to step 10.
9. If setting the alarm to a radio option, press the Tuning up/
down button to choose from either the radio station 'Last
listened' to, or from the presets. Press the Select button to
conrm the selection.
Note: The alarm may only use a preset which has already
been stored.
10. Press the Tuning up/down button to choose your desired volume
and press the Select button to confirm the setting. Your radio
will show “Alarm Saved” and exit the alarm setting screen.
Alarms are indicated in the display by the alarm symbol and the
corresponding alarm number (e.g. or ).
Note: When the radio is in standby mode, you can also press
the Alarm 1 button or Alarm 2 button to activate or disable the
alarms.
When the alarm sounds
The alarm will sound at the selected times for up to 60 minutes
unless cancelled. The maximum volume used for the alarm will
be specied during the alarm setting procedure. When your radio
is set to wake by the radio alarm, your radio will switch to the
selected radio station. If the radio cannot connect to the specied
the radio station, the buzzer will be used instead.
To cancel a sounding alarm, press and hold the Power button to
cancel a sounding alarm.
Note: If the radio is switched on because of a radio alarm you can
control basic functions such as the volume control.
When the alarm activates it will start softly and gradually increase
in level. The radio will automatically switch back to standby mode
when the 60 minutes have elapsed.
Snooze timer
1. When the radio alarm sounds, pressing any button other
than the Volume up/down button will silence the alarm for the
selected number of minutes. When the buzzer alarm sounds,
press any button. This will silence the alarm for the selected
number of minutes. The Snooze time can be adjusted between
5 and 20 minutes in 5 minute increments. Default setting is 10
minutes.
2. The snooze duration can only be set while the radio is playing.
To adjust the silence time for the snooze timer, press and hold
the Menu button to access the menu for the current mode.
3. Press the Tuning up/down button until 'Snooze Duration' is shown
on the display. Press the Select button to enter the setting.
4. Press the Tuning up/down button to choose the desired snooze
time to 5, 10, 15 or 20 minutes. Press the Select button to
conrm the setting. If “Off” is selected, when the alarm sounds,
pressing any button will not silence the alarm.
5. While the snooze timer is active the symbol “Z” is ashed on
the display.
6. In order to cancel the Snooze timer while the alarm is
suspended, press and hold the Power button.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean DPR-64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DPR-64 in the language / languages: English as an attachment in your email.

The manual is 1.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DPR-64

Sangean DPR-64 User Manual - German - 22 pages

Sangean DPR-64 User Manual - Dutch - 22 pages

Sangean DPR-64 User Manual - French - 22 pages

Sangean DPR-64 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info