797046
14
Zoom out
Zoom in
Previous page
1/19
Next page
13
Scan sensitivity setting – FM
Your radio will normally scan for FM broadcasts which are strong
enough to give good reception. However, you may wish the Auto
scan function to also be able to find weaker signals, possible
from more distant radio transmitters. Your radio includes a local /
distant option for the Auto-scan function.
1. Press and hold the Power button to switch on your radio.
2. If needed, press the Band button to select the FM band.
3. Press and hold the Info button to enter the FM menu setting.
4. Press and release the Tuning Up or Down buttons until the
display shows “FM Scan Zone” then press the Select button to
enter the scan zone setting.
5. Press the Tuning Up or Down buttons to switch between Local
and Distant options on the lower line of the display. The Distant
option will allow the radio to nd weaker signals when scanning.
6. Press the Select button to confirm your selection. The radio
will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until
changed or until a System Reset.
Note:
The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weak (distant) signals.
Clock and Alarms
Automatically updating the clock
You can specify that the unit sets its clock from DAB or FM radio
broadcasts. After a power failure the radio will then set its clock
the next time that you turn on the radio in DAB or FM mode.
Alternatively you can specify that the time is not automatically
updated. In this case the clock must always be set manually after
a power interruption.
1 . With your radio switched on, press and hold the Menu button to
access the menu for the current mode.
2. Press the Tuning up/down button until “Time” is highlighted on
the display. Press the Select button to enter the setting.
3. Press the Tuning up/down button until “Auto” is highlighted on
the display. Press the Select button to enter the setting.
4. Press the Tuning up/down button to choose an update option
from “DAB”, “FM”, “Any” or “No” as required. Press the Select
button to confirm your choice. The radio will then exit to the
previous menu setting.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean DPR-64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DPR-64 in the language / languages: English as an attachment in your email.

The manual is 1.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DPR-64

Sangean DPR-64 User Manual - German - 22 pages

Sangean DPR-64 User Manual - Dutch - 22 pages

Sangean DPR-64 User Manual - French - 22 pages

Sangean DPR-64 User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info