567085
15
Zoom out
Zoom in
Previous page
1/16
Next page
14
GB
Factory reset
If your radio fails to operate correctly or some digits on the display are
missing or incomplete, carry out the following procedures.
1. Switch on your radio.
2. Press and hold down the INFO button to enter Advanced mode.
3. Press Tuning Up/Down button to allocate System, press Select
button to enter System.
4. Press Tuning Up/Down button to allocate Factory Reset,
press Select button to enter Factory Reset.
5. Press Tuning Up/Down button to select YES, then press Select
button to start the Reset, display will appear restarting.
6. A full reset will be performed, the station list and presets will
be erased. Display will show “Welcome to Digital Radio“ and then
flash clock digits and Time is not set. You need to start over the
settings again as the time you used the clock radio for the first time.
In case of malfunction due to electrostatic discharge, reset the
product (reconnection of power source may be required) to resume
normal operation.
Auxiliary Input socket ( Aux In socket )
A 3.5 mm stereo Aux In socket is provided on the rear side of your
clock radio to permit an audio signal to be fed into the unit from an
external audio device such as iPod, MP3 or CD player.
1. Plug in the device into Aux In socket using 3.5 mm audio wire
connecting from headphone socket of the device to the
Aux In socket.
2. Press the Band button to AUX IN.
3. Adjust the volume control on your iPod, MP3 or CD player to a
reasonable high level and then adjust the Volume control on your
clock radio for comfortable listening.
Headphone socket
A 3.5 mm Headphone socket located on the rear side of your clock
radio is provided for use with either headphones or an earpiece.
Inserting a plug automatically mutes the internal loudspeaker.
Important:
Excessive sound pressure from earphones and headphones can cause
hearing loss.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean DCR-9 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DCR-9 plus in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DCR-9 plus

Sangean DCR-9 plus User Manual - German - 16 pages

Sangean DCR-9 plus User Manual - Dutch - 16 pages

Sangean DCR-9 plus User Manual - French - 16 pages

Sangean DCR-9 plus User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info