Manual Sangean DCR-9 plus (page 14 of 16) (English)

567085

Zoom out

Zoom in

1/16

Setting the clock manually

Normally your clock radio will set its clock automatically via the

DAB+ signal. If no DAB+ signal is available and you need to set the

time manually, please follow the procedures shown below.

Note:

The DAB+ signal will always override any manual time setting.

1. To set the clock time manually, press the On/Standby button to

switch on the clock radio.

2. Press and hold INFO button for 2 seconds to enter Advanced mode.

3. Press and release Tuning Up or Down button to allocate System.

4. Press Select button and then Tuning up or Down button to

allocate Time.

5. Press Select button to enter 12/24 hour format setting.

6. Press Select button and Tuning Up/Down button to select 12 hour or

24 hour format . Press Select button to confirm hour format.

7. Press Tuning Up button to enter Set Time/Date mode. Display will

show Time Set and flashes hour digit.

8. Press either Tuning Up or Down button to set hour and confirm the

hour setting by pressing Select button. Display will flash minute,

following above procedures to set minute and confirm the minute

setting by pressing Select button. Display will show Set Date.

9. Following above procedures to set date, month and year. Confirm the

setting by pressing Select button. Display will show “Time Saved“.

10. Press and release INFO button to return to normal radio mode.

Auto clock set mode

1. When radio is switched on, press and hold INFO button for

2 seconds to enter Advanced mode.

2. Press and release Tuning Up/Down button to allocate Time mode.

3. Press Select button and then Tuning Up/Down button to allocate

“Auto Update”.

4. Press Select button to enter Auto Update mode.

5. Press Tuning Up/Down button to select from Update from DAB,

Update from FM and No update. Confirm the setting by pressing

Select button.

Note:

If you select either Update from DAB or FM, the current time will be

displayed after receiving from DAB + station time signal or FM RDS

time signal. If no DAB or FM time signal is found, display will show

“Time not Set“. You should then either position the radio or its aerial so

that a signal can be received or revert to manual clock mode.

Set date format

1. When radio is switched, press and hold INFO button for 2 seconds

to enter Advanced mode.

2. Press and release Tuning Up/Down button to allocate Time mode.

3. Press Select button and then Tuning Up/Down button to allocate Set

Date format.

4. Press Select button and then Tuning Up/Down button again to select

dd(date) – mm(month) – yyyy(Year) or mm(month) – dd(date) –

yyyy (year).

5. Confirm the setting by pressing Select button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DCR-9 plus in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DCR-9 plus

Sangean DCR-9 plus User Manual - German - 16 pages

Sangean DCR-9 plus User Manual - Dutch - 16 pages

Sangean DCR-9 plus User Manual - French - 16 pages

Sangean DCR-9 plus User Manual - Spanish - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sangean DCR-9 plus Manual

Product: