567085
11
Zoom out
Zoom in
Previous page
1/16
Next page
10
GB
Stereo/Mono setting – FM
Your radio will play stereo broadcasts in stereo (via headphones) so
long as the received signal is of adequate strength. However, as a
stereo signal becomes weaker, the audio signal will become poorer.
It may be preferable to force the radio to play the station in mono in
order to reduce the level of audio noise.
1. Switch on the radio and tune to the required FM radio station as
previously described.
2. Press and hold the INFO button to enter Advanced mode until display
shows FM Scan Zone.
3. Press Tuning Up/Down button to allocate Mono Override then press
Select button to enter the Mono Override menu. Display will show
“Override Off “ if the radio is in auto stereo mode.
4. Press the Tuning Up/Down button and then Select button to switch
on the mono Override. While this setting is engaged, the radio will
play the current station in mono whether listening via headphones or
the loudspeaker.
Mono Override is a temporary setting and is applied to the currently
tuned station only. It is cancelled automatically by tuning to another
radio station.
5. If you wish to cancel Mono Override while listening to the currently
tuned radio station, press and hold the INFO button then following
above procedures to enter Mono Override menu to allocate
Override On. Press the Tuning UP/Down to allocate Override off.
Press the Select button to switch off the Mono Override. The radio
will then play the current station in stereo through headphones if the
signal is sufficiently strong.
Clock display
When your clock radio is in standby mode, the display normally show
the current time, date, month and year.
Display backlight
Either the radio is in on or standby, repeatedly press the LCD
brightness control button to set display backlight to required brightness.
Setting the Nap timer ( short timer )
If you like to set a short timer, press and hold down Nap timer button
NAP until display minute digit flashes. Press Tuning Up or Down to
select required short timer time then press Select button to confirm the
Nap timer setting. Display will show a “ “ indicating the nap timer
is set. Press and release NAP button to monitor remaining Nap
timer time. Nap timer allows for maximum 60 minutes.
When Nap timer is on, press On/Standby button to turn it off.
To cancel Nap timer set, press On/Standby button.
Display “ “ will disappear.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean DCR-9 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean DCR-9 plus in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean DCR-9 plus

Sangean DCR-9 plus User Manual - German - 16 pages

Sangean DCR-9 plus User Manual - Dutch - 16 pages

Sangean DCR-9 plus User Manual - French - 16 pages

Sangean DCR-9 plus User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info