Manual Sangean CL-100 (page 12 of 33) (English)

528624

Zoom out

Zoom in

1/33

SAME Programming

NOAA transmits coded weather and civil emergency alerts using

Specific Area Message Encoding (S.A.M.E. technology).

SAME enables you to customize your CL-100 to receive messages

relevant to your area, therefore reducing unwanted alerts. SAME is

activated by programming a 6 digit code – called a FIPS code – into

your radio.

The CL-100 is capable of being programmed with up to 25 different FIPS

location codes. To program the radio with the FIPS code for your area,

follow the steps below.

1. Press the MENU button and press the TUNE DOWN to scroll down

to the County Code, and press the SELECT button to enter

the menu. Then All, Multiple and Single will be displayed.

Choose Single if you want to receive only alerts sent to one county

(or FIPS code). Choose Multiple if you want to receive alerts from

more than one county that you have programmed. Choose All to

receive all alerts your station sends regardless of the FIPS codes.

2. Select Single to enter the Single County menu. Select New Code

and enter a six digit sequence to set up the FIPS code. Use the

TUNE UP/DOWN to select the desired number. Then use the VOL

UP button to select the second digit. Repeat this sequence until you

have set all six digits as desired, and press the SELECT button to

save the code and exit to Single County menu. More than one set of

FIPS codes can be stored under Single County mode, but only one

set of code can work at a time. The codes that are stored will show

in the Single County menu list. Press the TUNE UP/DOWN to

highlight the stored code, and press SELECT button to overwrite an

existing code. When a code is highlighted, press VOL UP/DOWN

button to enable/disable the code.

I love my Sangean CL-100 but have an issue with it and the manual. I cannot figure out how to preset the audio volume. The Alert volume level is just fine, but when an alert comes in and we are in another part of the house we have to run to the radio and turn up the voice volume to hear what the alert is all about. After the alert is over, the volume defaults back to it's lower preset level. Is there a way to preset the audio volume so I can avoid having to manually raise it for each alert? Submitted on 25-4-2023 at 01:57
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sangean CL-100 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sangean CL-100 Manual

Product: