797034

Sangean ATS-909X2 Manual

8
Zoom out
Zoom in
Previous page
1/19
Next page
07
GB
F
E
NL
D
When using rechargeable batteries, place it in the
NIMH / NICAD (Charger) position.
4. Close the Battery Compartment (43).
The battery level indicator (Ac) on the display shows
the battery level. The batteries should be replaced
when battery level is low or the battery level indicator
(Ac) flashes.
NOTE
Do not mix different types of batteries or rechargeable
batteries with different capacities.
NOTE
When replacing batteries, batteries must be replaced
within 3 minutes in order to retain the clock time. Other
information stored in the radio's memory will not be lost.
OPTION 2: EXTERNAL POWER ADAPTER
When using AC power, please use the AC power adapter
included with this radio or any equivalent power adapter
capable of providing DC 9V, 1.2A, center pin positive.
Before connecting the power adapter to a wall socket,
please ensure that the voltage that the socket supplies
is within the supported range (100~240 Vac, 50 / 60Hz).
Connect the power AC adapter to the DC IN socket
(41) and a wall socket. When the AC power adapter
is connected, any batteries inserted in the radio will
automatically be disconnected.
SETTING THE CLOCK FORMAT
The Time display (F) that displays the time can be set to
12 or 24-hour format when the radio is powered on or off.
By default, the clock format is set to the 24-hour format
and this setting only needs to be changed if the 12-hour
format is preferred.
Perform the following steps to change the clock format:
1. Press and hold the Menu button (29) to open the menu.
2. Use the Rotary Tuning knob (16) to select "24H" in the
Text display (U).
3. Press the Step button (17) or Enter button (30) to start
configuring the setting. The current setting ("24H") will
now blink in the Text display (U).
4. Use the Rotary Tuning knob (16) to select the desired
time format.
5. Press the Step button (17) or Enter button (30) to
confirm your choice.
6. Press the Menu button (29) to close the menu.
SETTING THE TIME
The time can be set when the radio is powered on or off.
SETTING YOUR LOCAL TIME AND TIME
ZONE
In order to enter the correct local time, first set your local
time zone and then set your local time.
Do this by performing the following steps:
1. Press the Home / World button (3) once.
The HOME indicator (B) will now be blinking on the
display and a city and time zone will be shown in the
Text display (U).
2. Use the Rotary Tuning knob (16) or Tuning Up / Down
buttons (18) to select your city or a city that is in the
same time zone as you are.
3. Press the Enter button (30) to confirm your choice.
4. Set the time by pressing the Time Set button (1).
The HOME indicator (B) will be blinking on the display
again.
5. Use the numeric buttons (19) to enter a time (e.g. to
enter 11:00, press 1-1-0-0).
6. If the radio is set to use the 12-hour clock format, press
the Decimal point button (32) to set either AM or PM.
When PM is selected, the PM indicator (E) will be
shown on the display.
7. After entering the time, press the Enter button (30) to
confirm it and complete setting your local time and time
zone.
NOTE
If you have made a mistake while entering a digit or
character, press the Cancel button (31) to erase the last
entered or selected digit or character. Press this button
multiple times to erase more than one digit or character.
SETTING A WORLD TIME
Aside from setting your local time zone, the ATS-909X2
also allows you to set a second time zone and display the
time in this time zone. This time is referred to as world time.
To select a time zone for the world time, follow these
steps:
1. Press the Home / World button (3) twice.
The WORLD indicator (B) will now be blinking on the
display and a city and time zone will be shown in the
Text display (U).
2. Use the Rotary Tuning knob (16) or Tuning Up / Down
buttons (18) to select the city which is in the time zone
of which you want the time to be displayed on your
radio.
3. Press the Enter button (30) to confirm your choice and
complete setting the time zone for the world time.
4. To switch between your local time and the world time,
press the Home / World button (3) twice and then press
the Enter button (30).
DAYLIGHT SAVING TIME
This radio comes with a Daylight Saving Time feature that
can be activated or deactivated by pressing the Daylight
Saving Time button (2). When Daylight Saving Time is
activated, the Daylight Saving Time indicator (C) will be
shown on the display.
RENAMING TIME ZONE CITIES
The ATS-909X2 allows you to customize the names of the
cities that are pre-programmed into the radio's memory.
If you have selected a time zone city that you would like to
rename, follow these steps:
1. Press the Home / World button (3) either once or twice,
depending on which city name you want to change.
2. Press the Edit button (28).
The first letter of the city name will now be blinking in
the Text display (U).
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean ATS-909X2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean ATS-909X2 in the language / languages: English as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sangean ATS-909X2

Sangean ATS-909X2 User Manual - German - 20 pages

Sangean ATS-909X2 User Manual - Dutch - 21 pages

Sangean ATS-909X2 User Manual - French - 21 pages

Sangean ATS-909X2 User Manual - Spanish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info